1.
The bending radius should not less than25 times of cable diameter.
电缆弯曲半径：不小于电缆外径的25倍。
2.
If the cable is to remain flexible there exists an upper limit to its overall diameter and hence to conductor size.
若要使电缆能弯曲,其总直径就有一个上限,从而电缆芯导线直径也有一个上限。
3.
The beam bends to a circular profile of radius R.
梁弯曲成半径为R的园形形状。
4.
Mathematic calculation approach of minimum bending radius of mandrel based on Matlab
基于Matlab的芯轴最小弯曲半径计算
5.
This opens up the radius of the turn for you so the turn is less tight.
这会加大你过弯的半径，相对减小弯道的曲度。
6.
Excellent pliability，flexibility and elasticity and suitable for special occasions requiring small bending radius.
本产品具有极好的弯曲、柔软性和弹性，可用于弯曲半径较小的场合。
7.
Experimental Research on NC Bending with Small Bending Radius of Aluminum Alloy Thin-Walled Tube;
铝合金薄壁管小弯曲半径数控弯曲成形的实验研究
8.
Residual Collapsing Strength Analysis of Bending Part Casing in Medium/Short Radius Horizontal Wells
中短半径水平井弯曲段套管剩余抗挤强度分析
9.
The pouring construction technology of small radius flat curve continuous steel bridge cantilever
小半径平弯曲线连续刚构桥悬臂浇筑施工技术
10.
Test method for determining mechanical and physical properties of electric cables and wires--Bending test
GB/T2951.23-1994电线电缆机械物理性能试验方法弯曲试验
11.
steep-S power cable
高弯度s形电源电缆
12.
lazy-S electrical power cable
低弯度s形电源电缆
13.
The formulae for calculating the bend radius of neutral plane and the decrement of bend angle after springback were derived by considering the deformation after unloading.
依据卸载变形的分析计算，推导出回弹后中性层弯曲半径及弯曲角变化量的计算公式。
14.
The winding trail caused them to lose their orientation.
弯弯曲曲的小径使他们迷失方向。
15.
A path weaved through the valleys.
一条小径弯弯曲曲通过山谷。
16.
THE DEMON STRATION FOR THE FORMULA ABOUT RADIUS AND LOCATION OF THE FORWARD CURVED BLADES OF CENTRIFUGAL FAN
离心式风机前弯曲叶片圆弧半径及中心位置之确定及其论证
17.
Research on the Making of Semi-Solid Billet of AZ91D Magnesium Alloy by Direct Extrusion-ECAP;
正挤压—等径道弯曲制备AZ91D镁合金半固态坯料研究
18.
THE RESEARCH OF INFLUENCE ON SUSPENSION BRIDGES AFTER CONSIDERING BENDING RIGIDITY OF CABLE
考虑主缆弯曲刚度后对悬索桥的影响