1.
double square closed single head wrench
套方环形一头固定扳手
2.
Unlock the socket by pulling the lever out and up to a 90-100oangle.
将处理器插座的固定扳手扳起至90度角的位置。
3.
Close the socket by lowering and locking the lever.
当中央处理器已确实装载在处理器插座内后,再将固定扳手扳回。
4.
free lever hexagonal fixed socket wrench
活柄六角固定套筒扳手
5.
bent-handle fixed socket
弯柄六角固定套筒扳手
6.
Only one wrench is able to install and dismount, due to fixed screw holes.
有固定螺丝孔，装卸只要一支扳手，更方便。
7.
a wrench having parallel jaws at fixed separation (often on both ends of the handle).
在固定分离位置有平行的狭口的扳手（通常在手柄的两头）。
8.
You hold the lower nut with one spanner while you undo the top nut with another one - do you see what I mean?
你用板手固定住下面螺母，同时用另外一把扳手拧开上面螺母，你明白的意思吗？
9.
While unscrewing the injector button head, a second wrench must be used to assure that the injector body is not loosened from the main valve.
在拧松注入器圆头螺栓时，要用第二个扳手固定住注入器，防止其从主阀门上松落下来。
10.
Using a wrench, place the bolts back into the cover and tighten.
用扳手将螺栓放回到阀盖上，并加以紧固。
11.
die-stock, of base metal
扳牙扳手,贱金属制
12.
Push the white retaining clips on each side of the memory socket outward.
将存储模块插槽两端的白色固定卡榫扳开。
13.
New Torque-controlled Pneumatic Wrench and It s Parameterized CAD;
新型定扭矩气动扳手及其参数化CAD研究
14.
Optimized Control of Uncertain Delay Arm Wrestling Contest Control Systems
不确定滞后扳手劲竞赛系统的优化控制
15.
The Research of Internet-based Arm Wrestling Contest Control System with Uncertain Delay
基于Internet不确定滞后的扳手劲竞赛控制系统研究
16.
Using a wrench, reassemble the diaphragm assembly by turning the hex bolt clockwise to tighten.
用扳手，顺时针方向旋转六角螺栓重新组装隔膜总成，并将其紧固。
17.
ratchet wrench extension
手摇螺丝扳手接长节
18.
a wrench with a crank-shaped handle.
有鹤头形的手柄的扳手。