1.
grain drive shifter
排种槽轮轴移动机构
2.
Design and simulation processing of outer-fluted feed mold
外槽轮式排种器模具设计与仿真加工
3.
Skewed Slot Wheeled Seeding Mechanism Working Length Comparative Trial Research
斜槽轮式排种器工作长度的对比试验
4.
The spiral horn of sheave and rotation speed had influence on sowing performance.
说明了槽轮的螺旋角度和转速对排种性能的影响。
5.
The structure and the principle of spiral sheave and the filling mechanism were introducted.
介绍了螺旋槽轮式排种器的结构和工作原理以及充填机理。
6.
The performance experiment demonstrated that homogeneity of the sowing by means of row sowing device with spiral sheave was lower than0.505, which reached the demands of wheat sowing.
性能实验论证了螺旋槽轮式排种器的播种均匀性系数低于0.505,达到了小麦精量播种要求。
7.
The article applied this kind of method to force locked cam and grooved cam.
文章将这种方法应用于力锁合凸轮和槽道凸轮。
8.
starting sheet cells
始极槽,种板槽,始板槽
9.
hopper ring gear
种子筒齿圈，种子筒排种齿轮环
10.
a channel through which water is discharged (especially one used for drainage from the gutters of a roof).
一种水由此排出的水渠（尤其是一种用作屋顶沟槽的排水装置）。
11.
Analysis on the Structure and Performance of the Combined Studded Feed Roller Seed Metering Device
钉轮组合式排种装置结构与性能分析
12.
A Way to Fix the Chip Flute Number for the multiple Thread Hindley Hob
确定多头直廓环面蜗轮滚刀客屑槽数的一种方法
13.
The groove so cut.
榫槽这种切割的凹槽
14.
Rice Seeds Feeding Process in Cell Wheel Based on High-speed Photography Technology
型孔式水稻排种轮充种过程的高速摄像分析
15.
A slot for a key in the hub or shaft of a wheel.
键槽轮子的毂或轴里的键的沟槽
16.
Dynamic Simulation of Geneva Mechanism with Curved Slot based on Matlab;
基于Matlab的曲线槽槽轮机构动力学仿真
17.
An Experimental Study of the Functional Mechanism and Performance of the Combined Studded Feed Roller Seed Metering Device;
钉轮组合式排种器的工作机理和排种性能的试验研究
18.
Experimental Study on the Structural Parameter Optimization and Performance of the Combined Studded Feed Roller Seed Metering Device
钉轮组合式排种器结构参数优化及其排种性能试验研究