1.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟
2.
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
3.
The Experimental Analysis of the Correction Factor of the SIF for the Transverse Surface Semi-Elliptic Crack of a Axle
轴表面横向半椭圆裂纹应力强度因子修正系数的实验分析
4.
3-Dimensional Numerical Simulation for Surface Cracks in FGMs under Thermal/Mechacal Loading;
热/机械载荷作用下含半椭圆表面裂纹FGM的3D数值模拟
5.
Stress Intensity Factor of Semi-elliptical Surface Cracks By Finite Element Analysis
半椭圆表面裂纹应力强度因子的有限元计算分析
6.
The Numerical Analysis of the Stress Intensity Factors for the Body with Surface Crack and Surface Semi-Spherical Cavity;
半球形表面缺陷影响下表面裂纹应力强度因子的数值分析
7.
Three-Dimensional Finite Element Analysis of SIFs of Elliptic Surface Crack in Dimple Fastener
埋头紧固件椭圆形表面裂纹应力强度因子的三维有限元分析
8.
Thermal-elastic Fracture of Hollow Cylinder with a Semi-elliptic Surface Crack
含表面裂纹圆柱壳体的热力耦合效应
9.
Analysis on Reasons of Surface Cracks Formation of S355 Round Tube Blank and Corresponding Countermeasures Taken
S355圆管坯表面裂纹成因及解决对策
10.
Scattering of SH-Wave by a Semi-Cylindrical Hill Above a Subsurface Inclusion and Crack;
SH波对夹杂裂纹附近半圆形凸起的散射
11.
SCATTERING OF INTERACTING CIRCULAR LININGSTRUCTURE AND CRACK IN HALF SPACSE
半空间中圆形衬砌与裂纹对SH波的散射
12.
Numerical Analysis of Stress Intensity Factor for Semi-Elliptical Crack on Cylinder Surface
圆筒表面椭圆裂纹应力强度因子的数值研究
13.
SCATTERING OF SH-WAVE BY INTERFACE CRACK AND NEIGHBOURING CIRCULAR CAVITY IN BI-MATERIAL VERTICAL HALF-SPACE
垂直半空间界面裂纹及附近圆孔对SH波的散射
14.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
15.
A toroid generated by a circle;a surface having the shape of a doughnut.
环面，环形圆纹曲面圆圈形成的超环面；具有炸面圈一样形状的表面
16.
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
17.
Crack- A mark found on a wafer that is greater than0.25 mm in length.
裂纹-长度大于0.25毫米的晶圆片表面微痕。
18.
The Research on the Surface Cracks of Continues Rolled Round Billet for Alloy Steels with a Little V and Ti
含V、Ti微合金钢连轧圆坯表面裂纹的研究