1.
Washers with cone face
GB/T850-1988锥面垫圈
2.
Washers with ball face
GB/T849-1988球面垫圈
3.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
4.
Inner sphere washers
GB/T1030-1988内球面垫圈
5.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
6.
horse shoe washer
开口垫圈,马蹄形垫圈
7.
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T9074.10-1988十字槽半沉头螺钉和锥形锁紧垫圈组合件
8.
Seat Face: Negates need for flange gaskets.
阀座表面:不需要使用阀兰垫圈。
9.
Spacer ring provides bearing surface and prevents deformation of the gasket.
隔离环提供支撑面，防止垫圈的变形。
10.
The gasket face of the flange should squarely contact the face of the mating flange.
法兰垫圈面应该与配套法兰面均匀接触。
11.
Chamfered washer or spacer with adjustable inside and outside diameters and chamfer.
内径和外径以及斜面都可调整的切角垫圈或垫片。
12.
Washers with split
GB/T851-1988开口垫圈
13.
Plain washers--Small series--Product grade A
GB/T848-1985小垫圈--a级
14.
Plain washers--Normal series--Product grade A
GB/T97.1-1985平垫圈-a级
15.
"Suitable corrective measures must be taken to remove these obstructions, such as taper boring the pipe or installing a spacer."
这是就要进行必要的矫正,例如对管道口进行锥形切削,或安装隔离垫圈,以消除这些障碍。
16.
Specifications for spring washers--Single coil spring lock washers
GB/T94.1-1987弹性垫圈技术条件弹簧垫圈
17.
bevel gear mesh adjusting gasket
锥齿轮啮合调整衬垫
18.
Sufficient force is required to push the metal sealing surfaces into the washer; too much force will damage the bead surfaces.
要求足够的力量来把金属密封表面推进垫圈，但太大的力量会损伤垫珠表面。