1.
For service, refer to the Liftgate Outside Handle Removal/Installation procedure in this group.
关于维修，请参阅本单元升降闸门外侧手柄的拆卸/安装程序。
2.
DOOR LATCH TO OUTSIDE HANDLE ROD
车门锁闩至外侧手柄连杆
3.
Open and support liftgate.
打开并支撑升降闸门。
4.
Remove liftgate upper trim panel.
拆去升降闸门上饰板。
5.
UPPER LIFTGATE OPENING TRIM
上部升降闸门开口装饰
6.
UPPER LIFTGATE OPENING TRIM PANEL
上部升降闸门开口饰板
7.
Remove the support from the liftgate.
从升降闸门拆去支撑。
8.
ACTUATOR TO LIFTGATE LOCK ROD
促动器到升降闸门锁杆
9.
Install the screws to attach the liftgate trim panel to the liftgate.
安装连接升降闸门饰板到升降闸门的螺丝。
10.
Liftgate Hinge to Body and/or Liftgate Bolt
升降闸门铰链到车体和/或升降闸门螺栓
11.
REAR DOOR INSIDE HANDLE ACTUATOR
后车门内侧手柄触发器
12.
Remove the liftglass latch from the liftgate.
从升降闸门上拆下升降窗。
13.
Remove door inside handle actuator from door.
从车门上拆卸车门内侧手柄触发器。
14.
Liftgate Lock Cylinder Switch Remove/Install
升降闸门锁芯开关拆卸/安装
15.
Install the liftgate opening upper trim.
安装升降闸门开口上部饰板。
16.
Position trim panel/cargo lamp at liftgate opening.
将装饰板/载货灯定位至升降闸门开口。
17.
Install the screws attaching the CHMSL to the liftgate.
安装用以固定CHMSL至升降闸门的螺丝。
18.
Install liftgate latch and actuator linkages.
安装升降闸门锁闩和调节器链。