说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 轴向拉伸性能
1.
Test method for longitudinal tensile properties of fiber-reinforced thermosetting plastic pipe
GB/T5349-1985纤维增强热固性塑料管轴向拉伸性能试验方法
2.
Experimental study of butt-welded connections subjected to axial tension
轴向拉伸作用下对接焊缝连接性能的试验研究
3.
Experiment of butt-welded connections subjected to axial tension
轴向拉伸作用下对接焊缝连接性能的试验
4.
Tensile Properties of Biaxial Weft-Knitted Fabric Reinforced Thermoplastic Composites;
双轴向纬编针织结构热塑性复合材料拉伸性能研究
5.
Tensile Impact Behavior of Multi-axial Multi-layer Warp Knitted (MMWK) Fabric Reinforced Composites;
经编多轴向针织复合材料高应变率下的拉伸性能研究
6.
Interlaced Biaxial Weft Knitted Structure and Tensile Properties of the Reinforced Composites
交织双轴向纬编针织结构及增强复合材料的拉伸性能
7.
Properties of Uniaxial Tension and Stress Relaxation of Zircaloy N18
N18锆合金的单轴拉伸和应力松弛性能
8.
Affluence of axial stretching on the energy bands of armchair carbon nanotubes
轴向拉伸对扶手椅型碳纳米管电子性质的影响
9.
Precracked tearing properties of flexible composites reinforced with biaxial warp knitted fabric under biaxial loads
双向拉伸载荷下双轴向经编织物增强柔性复合材料开缝撕裂性能研究
10.
The Study on Anti-crack Function and Damage of Concrete by Unixial Tension;
混凝土单轴拉伸下抗裂与损伤性能研究
11.
Fabrication and Tensile Properties of the Interlaced Biaxial Weft Knitted Structural Composites;
交织纬编双轴向针织结构复合材料的加工制造及拉伸力学性能研究
12.
The axial drawing ratio and hoop extension ratio should be properly matched.
轴向拉伸比和环向扩张比要合理匹配。
13.
CALCULATION OF SHEARING STRESS FOR AXIAL DRAWING OF TRANSFORM SECTION BAR
变截面直杆轴向拉伸时的剪应力计算
14.
Research on the Test Method for Tensile Properties of Biaxial Warp Knitted Fabrics;
双轴向经编织物拉伸试验方法的研究
15.
Uniaxial Tensile Mechanical Properties of High Ductile Fiber Reinforced Cementitious Composites
高韧性纤维增强水泥基复合材料的单轴拉伸力学性能
16.
Study on Anisotropy of AZ31B Magnesium Alloy Sheet Based on Tensile Mechanical Test
AZ31B镁合金板材拉伸力学性能的各向异性研究
17.
Method for determination of rheological properties of doughs using an extensograph
GB/T14615-1993面团拉伸性能测定法拉伸仪法
18.
Test method for tensile properties of oriented fiber reinforced plastics
GB/T3354-1999定向纤维增强塑料拉伸性能试验方法