1.
Study on Defction of Transverse Joints of Simply-Supported Hollow Slab Girder Bridges
空心板简支梁桥横向铰接缝病害分析
2.
Applied study on method of calculation of transverse load distribution for articulated slab girder bridges
铰接板梁桥荷载横向分布计算方法应用研究
3.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
4.
Design of Spherical Joint between Lifting Pipes of Deep-Sea Mining System and Analysis of Lateral Motion of Pipe System;
深海资源开采系统球铰硬管接头的设计及系统横向运动分析
5.
a tool for guiding handsaws in making crosscuts or miter joints.
在制作横切或斜缝接点中用于定向手锯的工具。
6.
YS Automatic Girth Welder (YS-AGW-I/II) is mainly used in horizontal girth inside / outside welding of large tanks、vessel etc. The welder applies submerged arc welding.
型埋弧自动横焊机采用埋弧横向焊接工艺，主要用于大型储罐、容器等内外环缝的焊接.
7.
3D Finite Element Analysis of Transverse Welding Joint in Aluminum Alloy During Billet-to-billet Extrusion Process
铝合金锭接锭挤压过程中横向焊缝的有限元分析
8.
Influence of Support Means of Hinge-Bearing for Container Crane's Boom on Lateral Vibration
岸桥前大梁铰支座支承对其横向振动的影响
9.
Dynamic characteristics of hydraulic pipelines of steering system of articulated vehicles
铰接车辆转向系统液压管路动态特性
10.
To attach by or equip with or as if with hinges or a hinge.
给…装铰链，用铰链接合
11.
Rudder: A vertical board hinged to the back of a boat that turns the craft.
方向舵：一种铰接于船尾的垂直板，用来控制航向。
12.
Research of Steer-by-Wire Control System on Wheel Loader with Articulated-Frame;
轮式铰接转向装载机线控转向控制系统研究
13.
Transverse series slot array in phase
横向串联缝隙同相天线阵
14.
The Effect of Transverse Cracks on Rigidity and Strength of CRCP Pavement;
横向裂缝对CRCP路面刚度和强度的影响
15.
Judge of Transverse Crack of Thick-Walled Seam by Ultrasonic Testing Method
厚壁焊缝横向裂纹的超声波判别方法
16.
Wind-induced lateral vibration of a 7500t floating crane's boom considering axial clearance between boom and pin hinge
7500t浮吊臂架考虑铰支座间隙的风致横向振动研究
17.
The forces that developed from the deformation in the cross-frame were primarily transmitted from the connection plate into the web by the upper pair of intermittent fillet welds.
因横向框架中的变形所发生的力最初由连接板通过较上面的一对间断贴角缝传入腹板中。
18.
steering knuckle tie rod end pressure lubricator
转向节横拉杆接头油嘴