1.
Effect of Pre-buckling Coupling Deformation on Stability of a Functionally Graded Plate
前屈曲耦合变形对功能梯度板稳定性的影响
2.
Finite Element Based Coupled Mode Initial Post-Buckling Analysis of a Composite Cylindrical Shell
基于耦合模式下初始后屈曲分析的复合柱形壳的有限元分析
3.
Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation
考虑剪切变形时轴向载荷联合作用下压杆屈曲
4.
Thermomechanical Experimental Research of SMPs and Microbuckling Analysis of Their Composites
形状记忆聚合物热力学实验研究及其复合材料屈曲变形机理分析
5.
Dynamic Buckling of Elastic-plastic Cylindrical Shells under Coupling Loads;
耦合载荷下弹塑性圆柱壳的动态屈曲研究
6.
Experimental Research on Buckling of Thin Films in Nano-scale under Mechanical and Thermal Loading;
纳米尺度薄膜力—热耦合载荷下屈曲的实验研究
7.
Dynamic Buckling of Cylindrical Shells under Coupling Loads
耦合冲击载荷下圆柱壳的动态屈曲研究
8.
Thermal Flection Distortion and Stress Analysis in Alumina Film/Al-alloy Substrate by Finite Element Method
开孔氧化铝薄膜/铝合金基体热屈曲变形和应力分析
9.
Finite Element Analysis of Thermal flection Distortion in Hard Alumina Film/Al-allay Substrate System by ANSYS
基于ANSYS的硬质氧化铝薄膜/铝合金基体系统热屈曲变形有限元分析
10.
Experimental Study of Interlaminar Deformation and Stresses in Laminates under Bending Load by Coupling DIC and FEM in Dual-scale
层合板弯曲层间变形与应力的两尺度耦合实验分析
11.
Analysis for Distortional Buckling of Cold-formed Thin-walled C-section Steel in Bending;
冷弯薄壁C形槽钢受弯畸变屈曲分析
12.
THE BUCKLING OF VARIABLE-STIFFNESS COMPOSITE PANELS WITH CURVILINEAR FIBER FORMAT
纤维曲线铺放的变刚度复合材料层合板的屈曲
13.
Thermal-Mechanical Buckling Behavior of Advanced Composite Grid Stiffened Plate and Shell with Delamination;
含损伤复合材料AGS板壳结构的热—机械力耦合屈曲分析
14.
Coupling deformation of aluminum alloy disk components during forging process
铝合金盘类锻件成形过程的变形耦合
15.
Study of Critical Theory about Buckling Forming of Middle Thick-walled Tube Bearing Axial Load;
中厚壁圆管轴压屈曲极限变形理论研究
16.
Experimental Study on Distortional Buckling of Cold-formed C-type Channel Section;
冷弯薄壁C形槽钢畸变屈曲的试验研究
17.
Out-Plane Buckling of Simply Supported Tapered Beam;
简支楔形变截面工字钢梁的弹性弯扭屈曲
18.
DEFORMATION AND BUCKLING ANALYSIS OF RING BY BARYCENTRIC INTERPOLATION COLLOCATION METHOD
圆环变形及屈曲的重心插值配点法分析