1.
Study on the Heat-treatment Parameters, Microstructures and Properties of ZDPH Highly Purified Forging Steels for Brake Discs
ZDPH高纯净锻钢制动盘材料热处理工艺及组织性能研究
2.
Manufacturing process and mechanical properties of forged clean steel tubesheets for 1000 MW nuclear power plant
1000MW核电管板纯净钢锻件制造工艺及其性能
3.
The test results showed that addition of La into the pure steel can modify the inclusion and improve the morphology of the inclusion thus to improve the corrosion resistance of the pure steel.
试验结果表明,镧加入纯净钢中,可变质夹杂物和改善夹杂物形态,从而提高了纯净钢耐腐蚀性能。
4.
Analysis on the purity of molten steel for typical steel grades of No.3 Steelmaking Plant of Jinan Steel
济钢三炼钢典型钢种钢水纯净度分析
5.
wrought iron of high purity made in Sweden.
瑞典制造的高纯度锻铁。
6.
Study of Microstructure of Ultrafined Ultrapure 42CrMoVNb Steel;
超细化超纯净42CrMoVNb钢的微观组织研究
7.
Smelting Process and Its Results of Clean Steel Used for 1000 MW Nuclear Power Tube Plate
1000MW核电管板用纯净钢的冶炼及效果
8.
The key to reduce the wheel tyre quality problems is not only to optimize the wheel tyre design,but also to improve purity of steel.
减少车轮轮箍质量问题的关键不仅要优化车轮轮箍设计 ,而且更要提高钢质纯净度。
9.
Investigation of Wear Resistance of Medium Manganese Steel and Forgeability of High Manganese Steel;
中锰钢抗磨性和高锰钢可锻性的研究
10.
Dirty steel due to entrapment of slag or pieces of refractory.
因夹杂炉渣或耐火材料颗粒而造成的不纯净钢。
11.
Fatigue Properties of Martensitic Stainless Steels with Ultra-low Carbon and High Cleanliness;
纯净超低碳马氏体不锈钢材料的疲劳性能研究
12.
Effect of Synthetic Slag During Converter Tapping on Cleanliness of 45 Steel
转炉合成渣洗工艺对45钢纯净度的影响
13.
Optimization of production process for 18-8 grade clean stainless steel and its effect
18-8型纯净不锈钢生产工艺优化及其效果
14.
Effect of RE on Cleanliness,Udercooling,Structure and Properties of Steel 4137H
稀土对4137H钢纯净度、过冷度、组织及性能的影响
15.
Study of High-temperature Wear Performance of Cast Hot-forging Die Steels;
精铸热锻模具钢高温磨损性能的研究
16.
Technological Test for Improving the Impact Toughness of Quenched and Tempered Steel Forgings
提高调质钢锻件冲击韧性的工艺试验
17.
High speed tool steel forged bars with large section--Technical requirements
GB/T9942-1988高速工具钢大截面锻制钢材技术条件
18.
Application of new technologies of liquid steel cleanliness improvement in continuous casting process
提高钢水洁净度新技术在连铸的应用