1.
The influence of specimen's thickness on JR curves, the curve of driving force for crack growth and the method of its determination are also discussed.
研究了J_R曲线受试样厚度的影响。 还介绍了弹塑性裂纹扩展推力曲线及其确定方法。
2.
Influence of fatigue crack tip plastic zone on crack propagation behavior in TC4ELI alloy
TC4ELI合金疲劳裂纹尖端塑性区对裂纹扩展的影响
3.
Anisotropic Plastic Stress Fields at a Slowly Propagating Crack Tip
缓慢扩展裂纹尖端的各向异性塑性应力场
4.
FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL
相变塑性钢的低周疲劳性能和裂纹扩展速率
5.
Higher-Order Asymptotic Solution of Growing Cracks in Elastic Perfectly Plastic Media
理想弹塑性材料扩展裂纹尖端场高次渐近解
6.
The Elastic-viscoplastic Field at the Tip of a Dynamic Propagating Crack in Power-hardening Materials
幂硬化材料动态扩展裂纹尖端的弹粘塑性场
7.
The Elastic-viscoplastic Field at the Mixed-mode Steadily Propagating Crack-Tip under Compression and Shear;
压—剪混合型定常扩展裂纹尖端的弹粘塑性场
8.
The Elastic-viscous-ideally Plastic Field at the Tip of Mode Ⅲ Steadily Moving Crack;
Ⅲ型定常扩展裂纹尖端的弹—粘—理想塑性场
9.
THE ASYMPTOTIC ELASTIC-VISCOPLASTIC FIELD AT MODEⅡDYNAMIC PROPAGATING CRACK-TIP
Ⅱ型动态扩展裂纹尖端的弹黏塑性渐近场
10.
The Research of J～* Integral in Elastic-Plastic Fracture Mechanics and Fracture Criterion for Mixed Mode Crack Propagation;
弹塑性断裂力学之J～*积分与复合型裂纹扩展断裂准则的研究
11.
RESEARCH ON THEORY AND EXPERIMENT OF THE TEMPERATURE FIELD AT CRACK TIP
裂纹扩展过程中裂尖塑性流变区温度场的理论和实验研究(英文)
12.
The Asymptotic Solution to the Dynamic Crack-tip Field in a Power Law Viscoplastic Material
幂硬化粘塑性材料动态扩展裂纹尖端场的渐近解
13.
Research on a Criterion for Crack Propagation Based on the Radial Strain Energy at Plastic Core Region and Numerical Simulation;
基于塑性区内方向应变能的裂纹扩展准则及应用数值模拟的研究
14.
Growing Crack Tip-fields on Anisotropic Bimaterial Interface
各向异性双材料界面裂纹扩展裂尖场
15.
Dynamic Split Tension Strength of Marble and the Properties of Crack Initiation and Crack Propagation under Dynamic Split Tests;
大理岩动态劈裂拉伸强度和裂纹起裂扩展特性
16.
Research on Creep Crack Growth of Nonlinear Viscoelastic Body;
非线性粘弹性体裂纹扩展速度的研究
17.
Study on Little Fatigue Crack Growth Rates of A7N01P-T4 Aluminium Alloy
A7N01P-T4铝合金疲劳小裂纹扩展特性研究
18.
Experimental study and numerical simulation on propagation characteristics of wing type cracks under compression
翼型裂纹扩展特性的试验和数值分析