1.
foam flame bonding
泡沫塑料热熔粘合（利用火焰）
2.
Adjusting of properties of low molecular polyamide hot melt adhesive
低分子聚酰胺热熔粘合剂的性能调节
3.
Synthesis of Polyester Hot-Melt Adhesive for Aluminium Foils Packaging for Medicine
药品包装铝箱用聚酯热熔粘合剂的合成
4.
And be widely used in printing, elections, fiber, painting, adhesive and so on.
共聚尼龙粉末是一种优秀的热熔粘合材料，适用于服装、车内装饰材料、装材料、面涂覆等。
5.
Follow manufacturer's instructions carefully when fusing interfacing to fabric pieces and use a press cloth.
衬布热熔粘合到衣片上时,仔细地按照制造商说明操作并需使用烫布。
6.
heat weld non-woven fabric
热[熔]粘[合]非织造布
7.
Spinning Technology of Durable Water-Repellent PP/PE Heat-Adhesive Core-Sheath Composite Fiber and Study on Its Behavior;
耐久型拒水PP/PE低熔点热粘合复合纤维的制备及性能研究
8.
paving block of fused slag without a binder (excl. heat-insulating blocks)
铺设用砌块，无粘合剂的熔凝矿渣制的（不包括隔热砌块）
9.
The board and chip are then heated to melt the solder and join the two together.
然后加热面板和芯片的缝合处，使焊锡熔化，从而把二者粘在一起。
10.
Hot-melt adhesives--Determination of thermal stability
GB/T16998-1997热熔胶粘剂热稳定性测定
11.
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
12.
The same heat that melt the wax, will harden the clay.
热既可熔化蜡，又可使粘土变硬。
13.
The Experiment and Theoretics Study of Viscosity of Cu-Sn Alloys;
Cu-Sn合金熔体粘度的实验与理论研究
14.
Apparent Viscosity of TiB_2 Particle Reinforced Aluminum Matrix Composites Melt
TiB_2/Al复合材料熔体的表观粘度
15.
Determination of the softening point of hot-melt adhesives Ball and ring method
GB/T15332-1994热熔胶粘剂软化点的测定环球法
16.
The adhesiveness between metal and PP by EVA hot melt adhesive
EVA热熔胶对金属与塑料粘结性能的研究
17.
Study on bonding principle of hot-melt adhesive based on copolyamide nonwoven fiberweb film
共聚酰胺非织造网膜热熔胶的粘接规律研究
18.
calender bonded
热轧粘合（非织造布）