1.
Research and Development of Organofluorine Coatings Using on Car Engine Gasket
轿车发动机密封垫用有机氟涂层的研制和开发
2.
The Election of a Particular Type Transmitter′s Gasket That Can Conduct Heat and Airproof
某型号发射机导热密封垫材料的确定
3.
The hard sealing gasket also can absorb the noise and vibration.
⑵密封垫圈也可吸收噪音及振动。
4.
Study of Sealing Performance and Wear Mechanism of Oil Seal Used in Engine
发动机油封的密封性能及磨损机理研究
5.
Research on the New Fluoroelastomer Coat-Metal Gasket for Seal of Internal-combustion Engine;
内燃机用新型氟橡胶涂层金属密封垫片的研究
6.
joint gasket- or packing- type, of laminated metal foil
层压金属箔密封或填密封式接合衬垫
7.
hydrodynamic mechanical seal
流体动压式机械密封
8.
The Improvement of Seal Steel Ball Press Process for Cylinder Head of Engine
发动机缸盖油道密封钢球压装工艺的改进
9.
Study on the Dynamic Auxiliary Seal Ring of Pusher Type Mechanical Seal
滑移式机械密封的动态辅助密封圈性能研究
10.
Trim or remove excess sealant film in the rear main cap oil pan gasket groovDO NOT remove the sealant inside the rear main cap slots.
修整或清除后主盖机油底壳垫圈凹槽中过多的密封剂薄膜。切勿清除在后主盖槽中的密封剂。
11.
All sponge rubber packing for watertight doors need to be renewed.
所有水密门的多孔橡皮密封垫换新。
12.
This plant is specially engaged in research, development and manufacture of the special equipment for static sealing spacer.
本厂是从事静密封垫片专用设备研究开发、造的专业厂家。
13.
Study and Development of the Three-way Catalytic Converter and Mat Evaluation Test Systems;
三效催化转化器及陶瓷密封衬垫评价系统研究与开发
14.
MCR Cylinder Head Sealing Gasket-Research,Development and Application of Metal Compounded Rubber Sealing Material
MCR缸头垫——新型金属复合橡胶密封材料的研发与应用
15.
Nonlinear Dynamic Stability of Liquid Hydrogen Turbopump Rotor-S eal System in Rocket Engine
火箭发动机液氢涡轮泵转子-密封系统的非线性动力稳定性
16.
Clean the injector port, replace critical injection port seals, replace injection port liners, and change septa as needed.
清洗进样口，如有必要，更换密封垫，衬管，隔垫。
17.
sealed chart-drive motor
密封式记录纸驱动电动机
18.
In most automotive engines, there are two openings, or ports, in the enclosed end of the cylinder.
很多汽车发动机里，气缸的密封端都有二个孔或开口。