1.
Studies on Process and Properties of PE/PP Hot-Air Through Bonded Diaper Nonwovens
热气流穿透PE/PP非织造尿布材料工艺及性能研究
2.
CFD simulation of jet penetration depth in gas-solid fluidized bed:comparisons with experiments
气固流化床内射流穿透深度的CFD模拟及其实验验证
3.
Moving swiftly through the atmosphere, meteoroids are heated rapidly by friction.
流星体在快速穿过大气层时，因磨擦而迅速加热。
4.
ANALYSIS OF FLOW AND HEAT TRANSFER CHARACTERS FOR POWER GENERATION SYSTEM EQUIPED WITH HOT-AIR-FLOW TURBINE USING SOLAR ENERGY
太阳能热气流透平发电系统流动与传热特性分析
5.
Solar chimney power generation and its energy loss
太阳能热气流发电系统透平发电及其能量损失
6.
The penetration of a particle into the lung is influenced by air velocities breathing patterns.
颗粒物对肺的穿透作用受气流速度和呼吸形式的影响。
7.
PENETRATION LENGTH OF A SIDE-BLOWN OXYGEN JET BY IMMERGED LANCE IN MOLTEN STEEL BATH
潜入侧吹氧气流股在炼钢熔池中的穿透长度的研究
8.
A natural escape of hot fluids from the steam reservoir should be prevented by cap rocks with low permeability.
只要存在通透性能低的盖层，蒸气储放热流体就不会自行外逸。
9.
Study on Uncovering Low Permeable Coal Seam Through Cross Cut by Deep-hole Blasting Technology to Increase Permeability of Coal Seam;
石门揭穿低透气性煤层深孔爆破增透技术研究
10.
A moderate but penetrating coldness.
寒气温和但有穿透力的寒冷
11.
Chill:a moderate but penetrating coldness.
寒气:温和但有穿透力的寒冷.
12.
Most close to the skin. Absorbent, ventilate.
穿在肌肤的第一层，吸汗、透气。
13.
To permeate(a porous substance)with a liquid or gas.
使浸透用水或气体穿过多孔物质
14.
Realization on NAT Traversal of SIP Signaling and Media Stream
SIP信令与媒体流穿透NAT的实现
15.
hot cathode mercury vapour rectifier tube
热阴极汞热气整流管
16.
Study on Gas Penetration during Gas-Assisted Injection Molding;
气体辅助注塑成型工艺中气体穿透的研究
17.
Study of Gas Penetration Behavior in Gas-Assisted Injection Molding
气体辅助注射成型气体穿透行为的研究
18.
Influence of Processing Parameters in Gas Assisted Injection Molding on Gas Penetration
气辅成型工艺参数对气体穿透行为的影响