1.
Design Key Points of Carbon Fiber Full-wrapped with Aluminium Liner Hydrogen Cylinder for Vehicle
车用铝内胆碳纤维全缠绕氢气瓶设计要点
2.
Calculation and Analysis of the Strength of the Liner of the Gas Cylinder Hoop-Wrapped by Glass Fiber with a Steel Liner
钢质内胆玻璃纤维环缠绕气瓶内胆强度计算分析
3.
EXPERIMENTAL AND SIMULATION STUDY ON BONFIRE TEST OF HIGH-PRESSURE HYDROGEN STORAGE VESSELS
纤维缠绕高压氢气瓶火烧温升试验及数值研究
4.
The carbon fiber wrapped gas cylinder boasts for its anticorrosion, long use life, lightweight, high strength and no breakage.
碳纤维缠绕气瓶具有耐腐蚀、用寿命长、轻、度高、破碎的卓越性能。
5.
Numerical Analysis of the Carbon-Fibre Winding Pressure Vessel Using Finite Element Method;
碳纤维缠绕复合材料气瓶的有限元数值分析
6.
Research on Safety Technique of All Composite Cylinders for the On-board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles;
塑料内胆复合材料全缠绕CNG气瓶安全技术研究
7.
WINDING PROCESS DESIGN WITH CARBON FIBER/EPOXY ON RUBBER LINER
碳纤维/环氧树脂在橡胶内衬表面的全缠绕工艺设计
8.
Toughness Epoxy Resin with High Modulus for Carbon Fiber Wet Filament Winding;
碳纤维湿法缠绕用高模量高韧性环氧树脂基体
9.
The Optimization of the Autofrettage Pressure and the Fiber Thickness of the Fully-wrapped Composite Gas Cylinder;
全缠绕复合气瓶预紧压力和缠绕层厚度的优化
10.
The Hygrothermal Aging and Lifetime Prediction of Carbon Fiber Filament-Wound NOL Rings;
碳纤维缠绕复合材料NOL环的湿热老化行为
11.
Finite Element Analysis and Optimization Design of the Full-wrapped Composite Cylinders;
全缠绕复合气瓶有限元分析和优化设计
12.
RESEARCH ON MODIFIED CYANATE ESTER RESIN SYSTEM FOR FILAMENT WINDING
纤维缠绕用改性氰酸酯树脂体系研究
13.
Method for preparation and internal pressure testing of filament wound pressure vessels
GB/T6058-1985纤维缠绕压力容器制备和内压试验方法
14.
Structural Analysis of Filament-wound Composite Vessel with Inner Metal Lining;
具有金属内衬的纤维缠绕复合容器的结构分析
15.
Relationship between the moisture absorption and properties of carbon fiber filament-wound NOL rings
碳纤维缠绕复合材料NOL环的吸湿过程与性能关系
16.
Application of Acoustic Emission Technology?in Water?Pressure Experiment of Filament?Wound Case
声发射技术在纤维缠绕壳体水压实验中的应用
17.
Study on the Epoxy Matrix Used for Wet Pre-impregnating Filament Winding Technology;
预浸湿法纤维缠绕技术用环氧树脂体系的研究
18.
Stress equilibrium factor and the cylinder wound angle of the filament-wound case
纤维缠绕壳体的应力平衡系数和圆筒缠绕角