1.
Establishment of a hot deformation equation for X70 pipeline steel
钛微合金化X70管线钢热变形方程的建立
2.
Hot Deformation Constitutive Equation of Alloy Inconel 690
Inconel 690合金热变形本构方程研究
3.
Thermal Compression Deformation Constitutive Equation of 7039 Aluminum Alloy
7039铝合金的热压缩变形本构方程
4.
Flow stress constitutive equation of 01570 aluminum alloy during hot compression
01570铝合金热压缩变形的流变应力本构方程
5.
The hot deformation behavior of7055 aluminum alloy compressed under high temperature can be represented by stress strain rate equation.
可用应力应变速率方程来描述7055铝合金高温压缩变形时的热变形行为。
6.
Optimization of General Constitutive Equation for Hot Deformation of SiC Particle Reinforced Al Matrix Composites
SiC颗粒增强铝基复合材料的热变形本构方程及其优化
7.
Algebraic Method for Solving Modified Boussinesq Equation;
代数法求解变形Boussinesq方程
8.
Simulation of Q235 Steel Recrystallized Microstructure during Hot Forming Process;
Q235钢热塑性变形过程中微观组织模拟
9.
Simulation of Microstructure Evolution of 58SiMn Steel during Hot Deformation
58SiMn钢热成形过程的微观组织演变模拟
10.
The relief of some of the internal strain energy of a previously cold-worked metal, usually by heat treatment.
冷塑性变形金属释放其部分应变能的过程叫回复，通常采用热处理的方法。
11.
Test method of heat deflection temperature underbending load for plastics
GB/T1634-1979塑料弯曲负载热变形温度(简称热变形温度)试验方法
12.
Research on Relationship Between Temperature, Heat and Thermal Deformation and Calculating Method
温度、热量与热变形的关系及计算方法研究
13.
Discussion on the Strain Induced Transformation during Hot Deformation Process of 2205 Duplex Stainless Steel
2205双相不锈钢热变形过程中形变诱导相变的探讨
14.
Generalized Constitutive Equations of Simple Thermo- elastic Solids;
简单热弹性固体本构方程的一般形式
15.
Darboux Transformation and Explicit Solutions of Variant Boussinisq Equation;
变形Boussinesq方程的Darboux变换和精确解
16.
Thermal Flow Stress Constitutive Equation of Cr9Mo High-alloy Steel
Cr9Mo高合金钢的热流变应力本构方程
17.
Deformation mapping approach and study on nonlinear WBK water wave equations;
形变映射方法和非线性WBK方程的研究
18.
Effects of Solution Treatment on Hot Deformation Process and Deformed Microstructure of Mg-2.0%Zn-0.7%Mn Alloy
固溶处理对Mg-2.0%Zn-0.7%Mn合金热变形过程及变形组织的影响