1.
Effect on Head Slab Quality for Free-opening State in Casting
连铸初期状态对浇次头坯质量的影响
2.
Study on solidification of round billet horizontal continuous casting and quality of casting blank
水平连铸圆坯凝固及铸坯质量的研究
3.
Effect of roll gap shrinkage optimization on slab quality
板坯辊缝收缩优化对铸坯质量的影响
4.
Research on Quality Control of 45~# Steel Billet
45~#钢小方坯铸坯质量控制研究
5.
As-sintered hard metal blanks used in measuring tools
GB/T3612-1989量具用硬质合金毛坯
6.
Blank for hard metal (carbide) gauge blocks
GB/T10565-1989硬质合金量规毛坯
7.
Advancing the quality of continuous casting slab,creating the famous brand about angle steel
提高连铸坯质量,创精品角钢名优品牌
8.
QUALITY PROBLEMS AND COUNTERMEASURES FOR NEAR-NET-SHAPE CC OF BEAM BLANKS
近终形连铸异型坯的质量问题及对策
9.
Analysis and Improvement on Surface Quality of CC Round Billet for Pipe－rolling with Mandrel Mill
连铸连轧圆管坯表面质量分析与改进
10.
Perfecting the Secondary Cooling System and Improving the Quality of CC Billet
改善二冷系统提高连铸小方坯的质量
11.
Quality Analysis of Inspection for LZ50 Axle Shaft Blank and Its Improving Measures
LZ50车轴坯探伤质量分析及改进措施
12.
Control technology of surface quality of 360mm×450mm CC bloom
360mm×450mm连铸大方坯表面质量控制技术
13.
The Effect of Cross Section Area of Casting Bar on the Quality of Copper Rod for Electrical Application of SCR Continuous Casting & Rolling
铸坯截面积大小对SCR连铸连轧电工用铜线坯质量的影响
14.
The Relationship Between the Gap Accuracy of Fan-shaped Roll with Quality Slab in the thin Slab Caster
中薄板坯连铸机的扇形段辊缝精度与铸坯质量的关系
15.
Reasonable Control the Upper Crop End and Lower Crop End Weights,and Improve the Utilization Rate of Crankshaft Blank of Electroslag Remelting Ingot
合理控制切头切尾量,提高电渣钢曲轴坯成材率
16.
Improvement of CC billet quality by optimizing mould operating parameters
优化结晶器运作参数,提高连铸方坯质量
17.
Effect of Multi-electromagnetic Fields on the Quality of Continuous Casting Hollow Billet;
复合电磁场对连铸空心管坯质量的影响
18.
Study of Slab Quality on Unsteady Casting Conditions and Liquid Steel Behavior in Mold;
非稳态条件铸坯质量与结晶器钢液行为研究