1.
Research of Wedm Adaptive Control Technology for Variable-Height Components;
电火花线切割变厚度加工自适应控制技术的研究
2.
In most fovea, the depth decreased and the thickness increased.
绝大多数黄斑中心凹变浅 ,厚度增加。
3.
Effect of Polishing Load on Slurry Film Thickness in Chemical Mechanical Polishing
CMP加工过程中加工载荷对液膜厚度的影响分析
4.
Experimental analysis on thickness control of variable thickness composite laminates during autoclave process
变厚度复合材料热压罐工艺层板厚度控制的实验研究
5.
Influence of Undeformed Chip Thickness on Surface Roughness-Spectral Analysis of the Profile of Machined Surface
切削厚度对加工粗糙度的影响——已加工表面轮廓的谱分析
6.
Conclusion The corneal thickness of myopia with high degree and supra high degree become thinner with the increase of refraction.
结论 高度及超高度近视的角膜厚度随着屈光度的增加而变薄。
7.
Thin-Walled Part of Variable Wall Thickness Machining Modeling and Its Experimental Study
薄壁变壁厚零件切削加工建模及其实验研究
8.
The thickness of the steel plate handled by this roller mill (shear machine) is 25 millimeters.
这台滚压机（剪切机）加工的钢板厚度可达25毫米。
9.
Wire-DEM on the Heavy-Thickness and Thin -Wall Alumium Alloy Special Parts
铝合金大厚度薄壁异形件的线切割加工
10.
degree of cold work
冷加工(材料变形)程度
11.
Study on the Process Parameters Control of Plasma Arc Cutting Variable-thickness Plates;
等离子体弧变厚度切割工艺参数控制研究
12.
Adapability Analysis of Dragline Mining System Under Conditions of Changing Stratum Thickness
岩层厚度变化下拉斗铲工艺适应性分析
13.
Processing control for deformable super-thin planar elements with thicken-optical-cement method
增厚-光胶法控制超薄、变形平面零件的加工工艺研究
14.
EFFECTS OF ELECTRODE INSULATION THICKNESS ON ELECTROCHEMICAL DRILLING STABILITY AND ACCURACY
绝缘层厚度对孔电解加工稳定性和精度的影响(英文)
15.
pipe concrete coating thickness
管子混凝土加重层厚度
16.
The Surveillance and Study of Thermal-Creep Stress of the Thick Concrete Liners with Big Diameters during the Construction in the TGP;
三峡工程大洞径、厚衬砌混凝土施工期监测及温度徐变应力研究
17.
Application of weighted-residual method to dynamics analyses of sectional cylindrical shells of variable thickness
加权残值法在变厚度圆柱壳块动力分析中的应用
18.
VPPA Adding Welding Process, Microstructures and Properties Analysis of AZ31B Magnesium Alloy Thick Plate
AZ31B镁合金厚板变极性等离子加丝焊接工艺及接头组织性能研究