说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 屈曲模式
1.
As one of several strength-governing modes, distortional buckling is receiving more attentions.
作为控制冷弯薄壁型钢承载能力的几种屈曲模式之一,畸变屈曲正逐步受到重视。
2.
Elastic Buckling Mode and Influence Factors of Hexagonal Honeycombs Under Biaxial Loading
受面内双向荷载蜂窝材料的弹性屈曲模式及其影响因素
3.
Local buckling is the dominant failure mode for composite steel column.
局部屈曲是组合钢柱常见的失效模式之一.
4.
Modal Analysis of Radial Impact Buckling of Multirow Rectangular Thin-wall Steel Tube
排式矩形薄壁钢管径向冲击屈曲模态分析
5.
Post-buckling Analysis of Subsea Pipelines and the Buckle Propagation
海底管道的后屈曲模态与屈曲传播分析
6.
Finite Element Based Coupled Mode Initial Post-Buckling Analysis of a Composite Cylindrical Shell
基于耦合模式下初始后屈曲分析的复合柱形壳的有限元分析
7.
Elephant Foot Buckling Research of Large Cylindrical Oil Storage Tanks;
大型立式圆柱形油罐“象足”屈曲研究
8.
Buckling is one kind of important failure modes of ship structures, which deserves notice especially when slamming is involved. Ship structures always buckle on the following two occasions.
结构屈曲是船舶结构的一种重要失效模式,尤其是当砰击发生时,更值得特别关注。
9.
Test Study on Mechanical Property of Double-Tube Buckling-Restrained Braces;
双管式屈曲约束支撑力学性能的试验研究
10.
The Micro-constitutive Model of Knitted Fabric and Buckling Analysis of Fabric;
针织物的细观本构模型和织物的屈曲分析
11.
Simulation on Constrained and Dynamic Buckling of Structure;
结构在约束下和动力作用下屈曲的数值模拟
12.
Research on Thermal Stress and Buckling of HT Submarine Pipelines;
高温海底管道温度应力计算与屈曲模拟研究
13.
ULTIMATE BEARING CAPACITY AND BUCKLING MODES ANALYSIS OF TRAPEZIUM CHANNEL SECTION ARCH CORRUGATED STEEL ROOF
梯型波纹拱结构的屈曲模态及其极限承载能力
14.
Numerical Simulations on Buckling Stability of Subsea Pipelines with Imperfections
含缺陷海底管道屈曲稳定性的数值模拟
15.
Numerical simulation on buckling of combined multilayered unequal-thickness cylindrical shell
多层不等厚组合圆柱壳屈曲数值模拟分析
16.
Energy dissipation and vibration control performance of buckling-restrained braces in Benchmark building
基于Benchmark模型的抑制屈曲支撑耗能减振作用分析
17.
Post Buckling Behavior Analysis of Composite Laminated Plates and Shells Structures;
复合材料层合结构屈曲和后屈曲研究
18.
Buckle folding: Method of folding sheets of paper where the sheet is bent or buckled by a metal plate.
栅栏式折页(梳式折页):用金属栅栏把纸张弯曲屈折的方法。