说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 粘结固体润滑涂层
1.
Study on the Tribological Properties of Adhesive Solid Lubricating Coatings
表面粘结固体润滑涂层摩擦学性能研究
2.
Effects of Atomic Oxygen Irradiation on the Friction and Wear Behavior of MoS_2-doped Phenolic Epoxy Resin-based Bonded Solid Lubricating Coatings
原子氧辐照对MoS_2/酚醛环氧树脂粘结固体润滑涂层摩擦磨损性能的影响(英文)
3.
INFLUENCE OF HEAT TREATMENT ON MICROSTRUCTURES AND ADHESIVE STRENGTH OF HIGH TEMPERATURE SOLID SELF-LUBRICANT COATING
热处理对高温固体自润滑涂层组织结构及结合强度的影响
4.
Effect of Ultraviolet Irradiation on the Tribological Properties of MoS_2/Phenolic-Epoxy Resin-based Bonded Solid Lubricant Coatings
紫外辐照对MoS_2/酚醛环氧树脂黏结固体润滑涂层摩擦学性能的影响
5.
Research on Property of Metal Based Nano/Submicron Solid Self-lubricating Coating;
金属基纳米/亚微米固体自润滑涂层的性能研究
6.
Preparation and Bearing Behavior Analysis of Solid Lubrication Film in Ceramic-Ball Bearings
陶瓷球轴承固体润滑涂层制备与承载特性研究
7.
the Integrative Technology of Solid-oil-nano-lubrication and Anti-wear and its Application
“固-油-纳”一体化耐磨润滑涂层技术及其应用
8.
Study on Tribological Properties of Novel Solid Lubricating Material and Coatings at Elevated Temperatures
宽温域固体润滑材料及涂层的高温摩擦学特性研究
9.
Tribological Properties of POB,PA and MoS_2 Solid mixture Lubrication Coating Prepared by In-situ Synthesis
原位合成制备POB、PA、MoS_2固体混合润滑涂层的摩擦学性能
10.
bonded solid lubricant
分散于粘合剂中的固体润滑剂
11.
Research on Cutting Experiment in Combination with Microdose Cooling and Lubrication Coated Tools
微量润滑冷却与涂层刀具结合的切削试验研究
12.
Study of Wear Resistant Composite Phosphating and Bonded Solid Lubricant Film
耐磨复合磷化及粘接固体润滑膜的研究
13.
Study on the Mesoscopoic Surface Mechanical Properties of the Porous Self-lubricating Sintered Material;
多孔自润滑烧结体介层力学特性研究
14.
A soft, adhesive coating material, such as plaster, grease, or mud.
涂料柔软粘稠的涂抹原料,如泥灰、润滑脂或泥浆
15.
Bond-slip of reinforced layer with steel wire mash and polymer mortar
高强钢绞线网-聚合物砂浆加固层粘结滑移
16.
Effect of Metallic Bonded Coatings Prepared via Different Spraying Methods on the Adhesion of Ceramic Thermal Barrier Coating to Copper Substrate
粘结层喷涂方法对铜基体与热障涂层结合强度的影响
17.
THE STUDY ON THE INFLUENCE OF SULFURING TO ABRADABILITY OF MUCOUS SYNOVIAL MEMBRANE SOLIDEN AT ROOM TEMPERATURE
渗硫处理对常温固化粘结润滑膜耐磨性影响的研究
18.
Adhesion to Substrate and Friction and Wear Behavior of Ni Alloy-Based Self-Lubricating Composite Coatings Prepared by High Velocity Oxygen Fuel Spraying
Ni60-Ni包MoS_2-Ni包C复合自润滑涂层的结合强度及摩擦学性能