说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 爆破扰动机理
1.
On blasting perturbation mechanism of rock burst in tunnel by dynamic photo-elasticity
用动光弹方法研究隧道岩爆的爆破扰动机理
2.
On the Study of Blasting Vibration Mechanism and the Control of Blasting Vibration Effects;
爆破震动机理及爆破震动效应控制的研究
3.
Dynamic Numerical Simulation for the Mechanism of V-shaped Notch Blasting
V形刻槽爆破机理动态数值模拟分析
4.
Shock blasting: its outburst preventive mechanism and safety precautions
震动爆破的防突机理及安全注意事项
5.
Study on the Rock Damage Mechanism of Blasting Vibrations with Low Frequency
低频爆破震动对岩石介质破坏机理研究
6.
Study on the Failed Mechanism and Experiment of Spiral Notch-holes Blasting;
螺旋切槽孔松动爆破力学机理及试验研究
7.
Study on the Mechanism of Notched Directional Splitting Controlled Blasting by Dynamic Photoelastic Method;
切槽定向断裂控制爆破机理的动光弹研究
8.
Dynamic Response and Damage Mechanism of Reinforced Concrete Structures under Blast Loading
爆炸荷载作用下钢筋混凝土结构的动态响应行为与损伤破坏机理
9.
The mechanic affection on the blast hole walls is simply analysed and cracking propagation caused by shaped charge is explained in this paper.
简单分析了聚能爆破装药在孔内爆破的力学效应,阐明了聚能爆破对岩石定向破裂的控制机理。
10.
Study on Mechanism of Rock Damage and Crack by Explosion Loading;
爆炸荷载下岩石爆破损伤断裂机理研究
11.
Mechanism Analysis and Numerical Simulation of the Blast Failure Modes of Jointed Rock Masses
节理岩体爆破破坏模式的机理分析及数值模拟
12.
Diversion Tunnel Blast Vibration Effect Analysis during Powerstation Expansion Project;
增容扩机时引水洞爆破振动影响分析
13.
Study on the Process and Mechanism of Steam Explosion Pulping of Lingnania Chungii Mcclure;
粉单竹蒸汽爆破法制浆及其机理研究
14.
Research on Mechanics of Charging Structure of Bottom Gas-Space in Deep-hole Blasting Engineering;
中深孔爆破孔底空腔装药机理的研究
15.
Study of Mechanism of Straw's Continuous Steam Explosion in Extruder
秸秆连续挤出蒸汽爆破处理的机理研究
16.
Development and Innovation Delay Initiating Techniques to Reduce Blasting Vibration
延时起爆干扰减震爆破技术的发展与创新
17.
Applications Blasting Vibration Test under Running Units Abstract;
在开机状态下进行爆破振动试验研究及应用
18.
Design of Automatic Stripping and Winding Machine for Demolition Lead Wire
立轴周转式爆破引线自动绕线剥线机的设计