1.
Study on Contact Fatigue Failure of Tractor Second Shaft Gear
拖拉机二轴齿轮接触疲劳损坏的研究
2.
Analysis on Fatigue Cracking of Cylinder Cap Bolt
缸盖螺栓接触损伤引发疲劳开裂分析
3.
Spalling was a major form of contact fatigue failures in nitriding steel.
氮化钢的主要接触疲劳破坏形式是剥落。
4.
The Effect and Mechanism of the Cermet Additive in Lubricating Oil on Contact Fatigue and Sliding Wear Performance of Steel/Steel Friction Pair;
陶瓷添加剂对钢/钢接触疲劳及滑动磨损性能的影响及机理研究
5.
Contact Stress and Fatigue Wear Failure Analysis of Medium-sized CNG Engine Cam/Tappet;
中型CNG发动机凸轮/挺柱接触应力与疲劳磨损失效分析
6.
Development of the Intelligent Measurement and Control System for the JPM-1 Contact-fatigue Tribometer;
JPM-1型接触疲劳磨损试验机智能化测控系统的研究
7.
Study on Coupling Relationship between Rolling Contact Fatigue and Wear of Wheel-Rail and Prevention Measures;
轮轨滚动接触疲劳与磨损耦合关系及预防措施研究
8.
Influence of rolling contact fatigue loads on stress intensity coefficients of rail surface contact fatigue crack
滚动接触疲劳载荷对铁轨表面接触疲劳裂纹应力强度系数的影响
9.
Finite element analysis on the contact fatigue life of high speed angular contact ball bearings
高速角接触球轴承接触疲劳寿命的有限元分析
10.
Standard of test method for surface load capacity of gears
GB/T14229-1993齿轮接触疲劳强度试验方法
11.
Exposure may produce olfactory fatigue or habituation.
接触可以引起嗅觉疲劳或成瘾。
12.
The Contact Fatigue and Wear Resistance of ADI
奥贝球墨铸铁的接触疲劳与耐磨性能
13.
Finite Element Analysis on Fretting Fatigue Contacting Stresses
微动疲劳接触应力的有限元分析研究
14.
Surface Contact Fatigue Failure Analysis on the Cam of CNG Engine
CNG发动机凸轮表面接触疲劳失效分析
15.
Research on effect of bearing steel contact fatigue life
GCr15轴承钢的接触疲劳寿命影响因素
16.
Rolling contact fatigue of microalloying case carburized gear steels
微合金化渗碳齿轮钢的接触疲劳性能
17.
Research on Prediction of Damage Failure and Fatigue Life for Composite Bolted Joints;
层合板接头损伤失效与疲劳寿命研究
18.
Failure of soldered joint during thermal fatigue test
微连接接头在热疲劳过程中的破坏规律