说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 热黏合接缝
1.
Investigation on the test method of rupture forces of thermal bonding seams in nonwovens shopping bags
非织造布购物袋热黏合接缝强力的测试方法探讨
2.
Seams shall be formed by stitching, heat sealing, gluing or any equivalent method. All stitched seam-ends shall be secured.
接缝必须采取缝合、热封、粘合或其他等效方法。所有缝合的接缝端都必须加以紧闭。
3.
Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31
AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响
4.
not having or joined by a seam or seams.
没有接缝的或没有缝合线连接的。
5.
Appearance of weld and impact toughness for the joints of ferrite stainless steel by laser-MAG hybrid welding
铁素体不锈钢激光-MAG复合热源焊缝成形及接头冲击韧性分析
6.
Research on Second Phase Particles in CGHAZ and Weld of Micro Alloyed Pipeline Steel
微合金管线钢焊接粗晶热影响区及焊缝的第二相粒子分析
7.
having or joined by a seam or seams.
有缝合线或被缝合线连接的。
8.
axially-split casing
有轴向接合缝的外壳
9.
The joining is hardly visible.
接合处几乎天衣无缝。
10.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
11.
In-situ detection of weld metal thermal cycle of 10CrMo910 steel
10CrMo910钢焊缝焊接热循环的实时检测
12.
VATS with direct suture of the flaw and pleurodesis were performed successfully.
我们成功地实施了胸腔镜裂缝直接修补及肋膜沾黏手术。
13.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
14.
It is particularly suitable for splicing tapes due to its high tack and quick stick properties.
由于它的高黏著力及快速黏著物性,尤其适合在接合胶带上。
15.
Application of endoscopic mucosal resection,clip suture and adjuvant diagnostic techniques in the management of colonic neoplasms
内镜下黏膜切除、夹子缝合和特殊检查在大肠肿瘤处理中的应用
16.
Preparation of Plywood Adhesive Free from Formaldehyde by in situ Chlorinating Graft Copolymerization
氯化原位接枝制备无甲醛胶合板黏合剂
17.
Seamless copper alloy tube for condenser and heat-exchanger
GB/T8890-1998热交换器用铜合金无缝管
18.
Study on the Properties of Heat Shrinkage Rate of the Fabrics on the Dlhesive Bonding Techniques of No-Stitched Seams Apparels
无针缝服装热压粘合对面料热缩率的影响