1.
Preparation of Y-TZP/MgAl_2O_4 Ceramic Composite and Research on Its High-Strain-Rate Superplasticity;
Y-TZP/MgAl_2O_4复相陶瓷的制备及高应变率超塑性研究
2.
Study on High Strain Rate Compression Superplasticity of Commercial AZ31 Magnesium Alloy;
工业态AZ31镁合金高应变速率压缩超塑性研究
3.
Superplasticity of TA15 Titanium Alloy Induced by Strain Rate Cycling
TA15合金应变速率循环超塑性研究
4.
Plastic Deformation and Nanocrystallization of Metallic Materials at High Strain Rate
金属材料的高应变率塑性变形及纳米化
5.
Improvement on the Severe Plastic Deformation Method and Investigation on the Mechanical Properties of Ultra-Fine Grained Aluminum;
强塑性变形方法的改进及超细晶纯铝应变速率敏感性研究
6.
The flow stress can be described by temperature-compensated strain rate, the so-called Zener-Hollomon parameter.
3．利用7055铝合金高温塑性变形时稳态流变应力σ、应变速率(?)
7.
Study on Pretreatment and Compression Superplasticity under Constant Strain Rate of Extruded AZ31 Mg Alloy
挤压态AZ31镁合金的预处理及恒应变速率下的压缩超塑性研究
8.
The characteristics of flow stress and dynamic constitutive model at high strain rates for pure iron
纯铁在高应变率下的流动应力特征及其动态塑性本构关系
9.
An Investigation of the High Temperature Creep and Superplasticity Deformation of AZ31 Magnesium Alloy;
AZ31镁合金高温蠕变及超塑性研究
10.
Study on Superplastic Deformation of Superalloy GH4169
GH4169高温合金的超塑性变形研究
11.
Moreover, the high temperature plasticity increase with the strain rate.
此外该合金的高温塑性亦随应变速率的增大而增加。
12.
Superplasticity and Application Research of Superalloy GH4169
GH4169高温合金的超塑性及其应用研究
13.
EFFECT OF PRESTRAIN ON THE SUPERPLASTIC DEFORMATION BEHAVIOR OF LOW-ALLOY HIGH-CARBON STEEL
预变形对低合金高碳钢超塑性变形行为的影响
14.
Study on New High Strength and Super High Strength TRIP Steels;
高强度和超高强度相变塑性钢的开发和研究
15.
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
16.
Influence of Strain Rate on Grain Refinement by Plastic Deforming;
应变速率对强塑性变形晶粒细化的影响
17.
The Influence of Deformation Temperature on The Superplasticity of High Carbin Steel Containing Cr and Si
形变温度对高碳铬硅钢超塑性能的影响
18.
Raising the superplasticity of AZ31 magnesium alloy via discontinuous deformation process
间断变形工艺提高AZ31镁合金超塑性的研究