1.
Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing
Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响
2.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
3.
Characteristics of Amorphous Brazing Ribbon of Cu-P Based Alloy
非晶态铜磷钎料真空钎焊紫铜的性能
4.
Contact reactive brazing between Al alloy/Cu/stainless steel and analysis on grain boundary penetration behaviors
铝合金/铜/不锈钢接触反应钎焊及晶界渗透行为分析
5.
spelter brazing alloy
铜锌基硬钎焊料合金
6.
Technical specification for welding copper and copper alloys
铜及铜合金焊接及钎焊技术规程
7.
The Research on Brazing Process betweeen W-Cu Heat Sink with Plated Nickel and Silver-copper Solder
镀镍钨铜与银铜焊料钎焊工艺的研究
8.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
9.
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
10.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
11.
Study on Vacuum Brazing of Al_2O_3 Dispersion-strengthen Copper and Copper T2
Al_2O_3弥散强化铜与T2铜的真空钎焊研究
12.
The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;
Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究
13.
Development of Brazing Grease for Stainless Steel-Aluminum in High Frequency Induction Brazing;
不锈钢—铝高频感应钎焊膏状钎料的研制
14.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
15.
Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;
铜基钎料钎焊颗粒增强复合涂层的研究
16.
Study on Brazing Technology for LY12 Aluminum Alloy at Middle-range Temperature;
LY12铝合金中温钎焊技术的研究
17.
Characteristics Study on Laser Welding-Brazing of Aluminum/Titanium Dissimilar Materials;
铝/钛异种材料激光熔钎焊特性研究
18.
Investigation on Brazing Process of Muti-Clad Aluminum Alloy FA7827;
FA7827铝合金多层复合板钎焊工艺研究