1.
Skill of Punch & Die and Inner Ejector & Outer Stripper Simultaneously to Process
线切割凸凹模同时加工及一次性加工内外卸料板技巧
2.
Remove the access cover( s) and fold the insulation outward and away from the thermostat( s). Do not remove the plastic cover.
拆卸观察盖板和温控器外部的绝缘保温层。不要拆卸塑料盖。
3.
knockout actuated stripper
打料机构带动的卸料板
4.
Remove the lamp from the hood inner panel.
由引擎罩内板将灯拆卸。
5.
Remove the trim panel and waterdam from door inner panel.
从内部仪表板拆卸饰板和挡水器。
6.
Remove the right front fender inner splash shielRefer to Group 23 Body for the procedures.
拆卸右前挡泥板的内挡泥板。至于拆卸步骤请参考单元23-车体。
7.
four huge crates within the compass of the elevator.
四个巨大的板条箱在起卸机的范围内
8.
Remove the in-vehicle temperature sensor from the instrument panel.
从仪表板上拆卸车内温度感知器。
9.
Baffles: Baffles providing controlled air vectors into and through the fume hood shall be constructed from the same material as the liner.
扰流板：扰流板应该和内衬材料一致，其引导通风柜气体排除柜外。
10.
Remove the inner and outer beltline weatherstrip.
拆卸内部和外部的带状防水饰条。
11.
We'll reinforce the boxes with straps and line them with plastic sheets.
此外，我们在纸板箱内衬塑料膜，在外面用条带加固。
12.
Foreign state of the art loading and unloading dock and dock levelers etc.peripheral facilities;
国外现代化装卸站台及其车位跳板等周边设备
13.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
14.
Spreading the lower side of the front panel plate outward( arrow B), detach the plate from the body.
向外侧拉伸前面板框的底边（头B）把板从机体上卸下。
15.
Remove the ash receiver and remove the screw in the back of the ash receiver housing that secures the instrument panel armature to the heater-A/C housing.
拆卸烟灰缸并卸下在烟灰缸外壳后面将仪表板衔铁固定到加热器-A/C系统外壳的螺钉。
16.
a waterproof plastic skin on a metal sheet
金属板的防水塑料外层.
17.
The President is strongly opposed to anyone within or without the administration attempting to shift the responsibility.
总统极力反对政府内外任何推卸责任的人。
18.
out in refuelling
外层燃料内移换料方式