1.
Carry out the Cutting Process by Electrical Control of the Head Shear Machine in Medium Plate Plant
中板厂切头剪电气控制剪切过程的实现
2.
Flying Crank Shear's Design and Its Shearing Process' Simulation;
曲柄式飞剪设计及其剪切过程的有限元仿真
3.
Numerical Simulation of Electrolytic Nickel Board's Cutting Process and Shear Stress
电解镍板剪切过程数值模拟及其单位剪切抗力的确定
4.
Simulation and analysis of cutting process of nickel board
镍板剪切过程数值模拟与工艺参数分析
5.
Effect of Orientation of Principal Stress on the Undrained Behavior of Saturated Sand under Monotonic Shearing
饱和砂土不排水单调剪切特性试验研究——考虑剪切过程中变化的总主应力方向的影响
6.
Simulation of the Tube Roll-Cutting Process and Key Equipment Design
管材滚压剪切过程的数值模拟及关键设备的研究
7.
Study on Shearing Stability of HPAM Solution in Flooding
注聚过程中HPAM水溶液剪切稳定性研究
8.
Studies for Influences of Shear Flows on Some Processes in Magnetic Reconnection;
剪切流影响磁重联过程的几个现象研究
9.
(Numerical) Simulation of Shear Strain Localization Processes along Circular Tunnels with Different Diameters
不同尺寸的圆形隧洞剪切应变局部化过程模拟
10.
FEM analysis of structure of shearing-meshing rotor during the mixing process
混炼过程中剪切啮合型转子的有限元结构分析
11.
Effect of Shearing on the Microcellular Foaming Process of Polymer
剪切对聚合物微孔发泡成型过程的影响
12.
Influence of drainage condition on formation of shear band in structured soil
排水条件对结构性土中剪切带形成过程的影响
13.
Prediction of Adiabatic Shear in High Speed Machining Based on Linear Pertubation Analysis
基于线性扰动分析的高速切削过程绝热剪切预测研究
14.
Agglomeration Kinetic Model of Nano-alumina Trihydroxide in Carbonation via Viscosity at High Shear Rate
通过高剪切粘度建立碳分过程中纳米ATH的附聚动力学模型
15.
Finite Element Method Simulation and Experimental Research on Sheet Metal Shearing and Blanking Process;
板材剪切与冲裁加工过程有限元模拟及实验研究
16.
Simulatiopn and Experiment Investigation of Viscous Dissipation of Polymer Melt in Injection Molding;
注射过程中熔体剪切发热的理论模拟及实验研究
17.
A Study on Shear Fracture Process and Fracture Toughness of Joint-grouting in Concrete Dam;
混凝土大坝接缝灌浆缝剪切断裂过程及其断裂韧度的研究
18.
The Experimental Research and Numerical Simulation on the Formation of Shear Band of Rock;
岩石变形剪切带形成过程的实验研究及数值模拟