1.
Manufacturing Process for Stainless Steel and Hi-Ni Alloy Steel Long Pipes(Part Ⅱ)
不锈钢和高镍合金长管的生产工艺(下)
2.
Manufacturing Process for Stainless Steel and Hi-Ni Alloy Steel Long Pipes(PartⅠ)
不锈钢和高镍合金长管的生产工艺(上)
3.
The product can be used a nickel-alloy raw material for producing stainless steel, alloy steel and alloy cast iron.
产品可以作为镍合金原料用于冶炼不锈钢、合金钢和合金铸铁。
4.
Study on Arc Brazing of Nickel-Based Alloy and Stainless Steel;
镍基合金与不锈钢电弧钎焊工艺研究
5.
Carbon steel, stainless steel, nickel and its alloys, and copper are suitable materials of construction for low-pressure service (
碳素钢、不锈钢、镍及其合金和铜是低压(的温度的合适的建材。
6.
Nickel free ,without allergic or irritation ,safe for nickel sensitive patients .
高弹性和低刚度，矫治力高出镍钛合金丝40%而刚度却只是不锈钢丝的40%。
7.
The most widely used stencil materials are metals, primarily stainless steel and nickel.
钢网最常用的材料是金属，主要是不锈钢和镍。
8.
PS2040 A is suitable for turning, milling, boring and grinding of heat resistant steel, high nickel steel and stainless steel.
A 极压乳化油适合不锈钢、热钢、镍钢等高硬度金属材料的车削、削、孔、削等加工。
9.
High grade forging with various of s.s.steel and alloy.
各种高要求和特殊牌号的不锈钢，高级合金钢、特种合金锻件的生产.
10.
A is suitable for turning, milling, boring and grinding of hard metal such as heat resistant steel, high nickel steel and stainless steel.
A 极压切削液适合耐热钢、镍钢和不锈钢等高硬度材料的车削、削、孔、削等加工。
11.
SEPARATION AND UTILIZATION OF COBALT AND NICKEL FROM WASTE HIGH MAGNETIC ALLOY STEEL
废高磁合金钢中钴、镍的分离和利用
12.
An Investigation of Phase Transformation Superplastic Diffusion Bonding of Titanium Alloy/Pure Nickel/Stainless Steel;
钛合金/纯镍中间层/不锈钢的相变超塑性扩散焊接研究
13.
There are four broad classifications of steel: carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
钢材大致辞可分为四类，即：碳素钢、金钢、强度低合金钢和不锈钢。
14.
The Research of Laser Alloying Processing to Improve the Wear-Resistance of Stainless Steel Pump Shaft;
不锈钢轴的激光合金化提高耐磨性的研究
15.
STUDY OF THE EFFECT OF EXCESS Ce ON CORROSION RESISTANCE OF HIGH Ni-Cr CAST STAINLESS STEEL
过量铈对铸造高镍铬不锈钢耐蚀性的影响
16.
Comprehensive Utilization of Nickel-containing Wastes from Stainless Steel Production Lines
不锈钢生产过程中含镍废弃物的综合利用
17.
Wetted parts: All Austenitic stainless steel and Stellite 6.
接触液体的部件：奥氏体不锈钢和钨铬钴合金6。
18.
Standard body/ bonnet materials include nine grades of carbon, low alloy and stainless steels.
标准阀体/盖材料包括9个等级的碳钢，低合金钢和不锈钢。