说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 阀门配置
1.
Valves can be supplied with an interlock system.
可以为阀门配置一个联动装置系统。
2.
alloy Iron Valve are furnished with TFE Braided packing and Reinforced Graphite gaskets.
合金铸铁阀门配置TFE纤维填料和强化石墨密封垫。
3.
When a cylinder with this valve configuration is in the upright position, the inlet of the tube is immersed in liquid and the liquid phase will be removed.
当带有这种阀门配置的钢瓶处在垂直位置时,管子的入口浸在液体中,就可以提取液相产品。
4.
MATERIAL AND SERVICE– Cast steel bolted bonnet valves are available in a variety of body/ bonnet materials and trims.
材料和应用–铸钢螺栓阀盖阀门可配置多种阀体/盖材料和阀内件。
5.
Pacific cast steel bolted bonnet valves are supplied in a wide range of body/ bonnet materials and trims.
美国太平洋铸钢螺栓阀盖阀门可以配置多种阀体/盖材料和阀内件。
6.
Valves ordered for compliance with API607 will be provided with graphite packing.
符合API607的阀门将配置石墨填料。
7.
Offered as standard on NIBCO Bronze Valves.
作为美国尼伯科青铜阀门的标准配置。
8.
The main valve spindle incorporates an inner spindle for double regulation memory stop and valve position setting.
主阀轴配置一个内轴,适用于双重调节止动记忆和阀门位置设置。
9.
Some styles are spring-actuated for immediate closure when flow stops.
有些类型止回阀配置弹簧驱动,能够在流动停止时,立即关闭阀门。
10.
Double-door check valves have twin discs on a spring-loaded center shaft.
双门止回阀在弹簧中心轴旁配置两个对称的阀瓣。
11.
Three diameters of straight pipe are required on the valve outlet.
阀门出口处需要配置三倍直径长度的直线管路。
12.
"Valve should have TFE seats, full-port, anti-blowout stems and chrome-plated brass/bronze ball."
阀门应配置聚四氟乙烯阀座,不缩径全流道,防吹出阀杆和镀铬黄铜/青铜球体。
13.
Test ports shall have internal check valve and be equipped with caps.
测试端口应该内置止回阀并配置阀盖。
14.
Lubrication- Where lube fittings are provided, valves should be lubricated periodically.
润滑-在配置润滑油连接件的地方,应该对阀门进行定期润滑。
15.
Valve shall have integral metering/test ports for flow balancing and flow measurement.
阀门应该配置用于流量平衡和流量测量的整体测试端口。
16.
Air filtering pressure reducing valve, solenoid valve, valve location feedback device, valve gate locator, quick exhaust valce.
空气过滤器减压阀,电磁阀,阀位反馈装置,阀门定位器,快速排气阀。
17.
Tag location for gate and globe valves is typically on the valve yoke or body/bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/阀盖法兰上。
18.
All carbon steel body ball valves come with carbon steel handles.
所有碳钢阀体球阀都配置碳钢手柄。