1.
Numerical Simulation and Control of Solidification Microstructure in Heavy Section High Manganese Steel Casting
厚断面高锰钢铸件凝固组织模拟与控制
2.
high manganese steel
高锰合金钢, 高锰钢
3.
Effect of Central Segregation on Mechanical Properties of High Manganese Medium and Heavy Steel Plate
中心偏析对高锰钢中厚板力学性能的影响
4.
Its microstructure include: dimple, plastic intererystalline, cleavage and mixed fracture.
高锰钢微观断口有:韧窝断口、塑性沿晶断口、解理断口及混合断口。
5.
Investigation of Wear Resistance of Medium Manganese Steel and Forgeability of High Manganese Steel;
中锰钢抗磨性和高锰钢可锻性的研究
6.
Casting Technology of High Strength and Thick Section Ductile Iron Mainshaft
高强度厚大断面球墨铸铁主轴的铸造
7.
The surface hardness of medium manganese austenite steel's is increased remarkably by using the casting surface alloy.
通过铸造表面合金化方法,使中锰奥氏体钢表面硬度提高。
8.
High manganese steels undergo a ductile to brittle transition at low temperature, which is accompanied by a change in the fracture mechanism from dimple fracture to intergranular fracture.
高锰奥氏体钢随温度降低其断裂机制由韧窝状断裂转变到晶界断裂。
9.
Investigation of Production Technology of Medium Plate of High Level Mirror Plastic Die Steel;
高级镜面塑料模具钢中厚板生产工艺研究
10.
Effects of web thickness and width of a channel section steel on its bending behavior
带材厚度及其腹板宽度对简单断面型钢成型的影响
11.
Finite element analysis of wall thickness changes of the cross section of seamless tube in hot continuous mandrel rolling
钢管热连轧过程横断面壁厚变化的三维有限元模拟
12.
Using Medium Mn-Ducpile Iron Instead of High Mn-Steel to Produce Pot Mill Scaleboard;
用中锰球铁代替高锰钢生产球磨机衬板
13.
Comparison Experiment on Inclusion in Nitride Chromium and Nitride Manganese for High Nitrogen Steel
高锰钢氮化铬和氮化锰中夹杂物的对比实验
14.
Study on High-Speed Rail Profile Measurement System Based on SOPC
基于SOPC的钢轨断面高速测量系统
15.
And it also introducos principal properties of typical anti-wear materials, such as high manganese steel, white cast iron and low-alloy anti-wear steel.
最后还介绍了典型耐磨材料高锰钢、口铸铁和低合金耐磨钢以及表面抗磨技术的基本特性。
16.
In-situ Observation of High-temperature Tensile Process of Fe16Mn0.6C High Manganese Steel
Fe16Mn0.6C高锰钢高温拉伸过程原位观察
17.
An Investigation on Structure and Properties of Cr-Ni-Mn-Mo Low Carbon High Alloy Steel;
铬镍锰钼低碳高合金钢组织性能研究
18.
Improvement of Drill Point Geometry for Drilling High Manganese Steel ZGMn13;
钻削高锰钢ZGMn13钻头刃形改进研究