1.
Study of the Metallographic Quantitative Analysis on Fire Copper Wire
火灾中铜导线熔痕金相组织定量研究
2.
Study and application of high-gloss & no-weldline steam injection molding technology
蒸汽高光无熔痕成型技术研究与应用
3.
CAE Study on the Effects of the Wall Thickness of the Lens on Automobile Lamp on the Weldline;
车灯面罩壁厚对熔接痕影响的CAE研究
4.
Analysis on the Causes of the Seams on Injection Plastics;
注射塑料制品产生熔接痕的原因分析
5.
NEW TECHNOLOGY FOR MODEL PREDICTION AND IMPROVEMENT OF WELD LINE STRENGTH IN INJECTION-MOLDED PARTS
注塑件熔接痕强度预测及提高新技术
6.
Study on Forming Mechanism and Eliminating Methods of Weld Line on Injection Molding Parts;
注塑件熔接痕形成机理与消除方法的研究
7.
Research on Removing Fusion Line with Hot Runner Multi-gates Sequence Control;
热流道多浇口顺序控制消除熔接痕的研究
8.
Studies on Improving Weld Lines in Molded Parts by Exploiting Sequential Injection Molding
热流道顺序注塑成型工艺改善制品熔接痕研究
9.
Fault Analysis and Optimization of Weld Line in Injection Molding Parts Based on Moldflow
基于Moldflow的注塑件熔接痕缺陷分析与优化
10.
Application of Rough Set Theory in the Analysis of Weld Line on Injection Molding Parts
粗糙集理论在注塑件熔接痕分析中的应用
11.
Weld-line Control and Analysis on the Injection Molded of Digital Camera Panel
数码相机面板注塑成型熔接痕控制分析
12.
Study on Forming Mechanism and Controlling Methods of Weld Line on Injection Molding Parts
注塑件熔接痕产生机理及控制方法的研究
13.
Positions control of the melt-lines in precise injection of long-sized transparent plastic
长规格透明塑件注射中熔接痕位置的控制方法
14.
ANALYSS AND CONTROL STRATEGY ON THE WELD LNE OF TRANSLUCENT NJECTON MOLDED PARTS
半透明注塑制品熔接痕分析及控制对策
15.
Flow Simulation Analysis for Plastic Injection Molding and Eliminating Methods of Weld Line Based on CAE
基于CAE技术的注塑成型模拟分析及其在消除熔接痕中的应用研究
16.
Application of Valve-gate Technology in the Control of Weld Lines of Large Injection Molded Products
阀式浇注技术在控制大型注塑件熔接痕中的应用
17.
Analysis and Control of Weld Marks of Auto Lamp Reflector Based on Valve-injection
基于阀式浇注系统的车灯反射体熔接痕的分析与控制
18.
Determination of Major,Minor and Trace Elements in Manganese Ores by Alkali Fusion-ICP-AES
碱熔融-ICP-AES法对锰矿石中主量、次量与痕量元素的同时测定