1.
A premium quality, high viscosity universal spark erosion fluid,?specially developed for use in Electrical Discharge Machine.
优质、高粘度通用火花电蚀加工油，特别适用于放电加工。
2.
A premium quality, medium viscosity universal spark erosion fluid, specially developed for use in electrical Discharge Machine.
优质、中等粘度通用火花电蚀加工油，特别适用于放电加工。
3.
spark erosion machine
电火花腐蚀加工机床
4.
Research on the Corrosion of Eletrodes and It's Theory Foundation in EDM;
电火花加工中电极蚀除及其理论基础的研究
5.
Research of the Mechanism of Material Erosion Based on Single Pulse in EDM;
基于单脉冲电火花加工的材料蚀除机理研究
6.
Influences of HF Acid Eroding Treatment on Surface Insulation Performances of Machinable Ceramics
氢氟酸腐蚀对可加工陶瓷表面耐电的影响
7.
Mechanism Analysis of the Pulsed Electrochemical Machining(PECM),Polishing(EP) and Micromachining(EMM) Based on a Capacity Model
基于电容模型的脉冲电解、电化学光整、蚀刻加工机理分析
8.
electrochemical etching and replating process
电化腐蚀和电镀工艺
9.
Modeling and Simulation for Inductively Coupled Plasma Etching of Silicon in MEMS Fabrications;
MEMS加工中电感耦合等离子体（ICP）刻蚀硅片的模型与模拟
10.
The Process of Alumnium Alloy Anodic Oxide Film Sealed by Green Sealing Method and Corrosion Resisitance Study;
铝合金阳极氧化膜的外加电压封闭工艺及耐蚀性研究
11.
Research for Impressed Electric Current Cathodic Protection Anti-co Port Rrosion Technology of Steel Pipe Pile in Wharf Engineering
码头工程钢管桩外加电流阴极保护防腐蚀技术研究
12.
Electrochemical Micromachining on Different Types of GaAs by Confined Etchant Layer Technique
不同类型GaAs上应用约束刻蚀剂层技术进行电化学微加工
13.
engraving machine, for photonic machining, for working with highly resistant materials
光子加工雕刻机,用于加工高耐蚀材料
14.
Implantation Technique of Corrosion Inhibitors for Air Injection Enhanced Oil Recovery
注空气驱油中的腐蚀及缓蚀剂加注工艺
15.
Basic environmental testing procedures for electric and electronic products--General guidance of accelerated testing for atmospheric corrosion
GB/T2424.10-1993电工电子产品基本环境试验规程大气腐蚀加速试验的通用导则
16.
Numerical Simulation of the debris distribution in Liquid-Solid Two-Phase Flow Field of High Speed Small Hole EDM drilling
高速电火花小孔加工放电间隙液固两相流场蚀除微粒分布数值模拟
17.
Study on Etching Process of Area-enlarging of Aluminium Foil for Electrolytic Capacitor;
电解电容器用铝箔扩面腐蚀工艺研究
18.
Study on Process of Fe-Cr-Ni Eelectroplated Coating and Electrochemical Corrosion Performance
Fe-Cr-Ni电镀工艺和电化学腐蚀研究