1.
FDC Floppy Disk Controller
软盘驱动器控制装置
2.
Specify your floppy disk drive and then insert a floppy disk.
指定软盘驱动器，然后插入一张软盘。
3.
Error copying files to floppy drive.
将文件复制到软盘驱动器时出现错误。
4.
A floppy drive cannot be specified as an install location.
不能将软盘驱动器指定成安装位置。
5.
Check the floppy drive to make sure the door is closed and it contains the correct disk.
检查软盘驱动器，以确定驱动器门已经关闭且装有正确的磁盘。
6.
Insert a formatted disk into your selected floppy disk drive.
请将格式化的磁盘插入选定的软盘驱动器。
7.
You must specify the floppy disk drive and the number of disks you want to create.
您必须指定软盘驱动器和要创建的磁盘数。
8.
"This floppy drive is not supported. The files will have to be copied manually.
"不支持这个软盘驱动器。将会手动复制这些文件。
9.
Search for new floppy disk drives each time your computer starts.
每次启动计算机时都搜索新的软盘驱动器
10.
The Home Networking wizard did not find a floppy drive on your computer.
家庭网络向导找不到计算机中的软盘驱动器。
11.
"The selected floppy drive is unable to support the required media type.
"所选软盘驱动器无法支持所需的媒体类型。
12.
Setup is unable to get configuration information for the selected floppy disk drive
安装程序无法取得所选软盘驱动器的配置信息
13.
diskette dirve adapter
软磁盘驱动器转接器
14.
Insert the diskette for drive %1.
在驱动器 %1 上插入软盘。
15.
Adds a floppy disk, removable disk drive, or optical drive to your network diagram.
在网络图中添加软盘、移动式磁盘驱动器或光驱。
16.
The floppy disk controller reported an error that is not recognized by the floppy disk driver.
软盘控制器报告软盘驱动程序不能识别的错误。
17.
{Insert disk with file ^1 in drive ^2.}
{请将包含文件 ^1 的软盘插入驱动器 ^2。}
18.
Generic specification for flexible disk drive
GB/T12627-1990软磁盘驱动器通用技术条件