1.
Research on Over-cured Depth in Stereolithography Process
光固化快速成形工艺中过固化深度的研究
2.
The propagation of these temperature changes into the underground is far deeper than that of the annual temperature variations.
这种温度变化对地下的波及深度远远超过年温度变化的影响深度。
3.
Effects of Silicon Carbide on the Cure Depth,Hardness and Compressive Strength of Composite Resin
碳化硅对复合树脂固化深度、硬度和压缩强度的影响
4.
Study on Low-Density Deep Well Drilling Waste Solidification Technology
低密度深井钻井废弃泥浆固化技术研究
5.
Effect of Radii barrier sleeves on cure depth of composite resin
光导棒保护封套对复合树脂固化深度的影响
6.
This is much hotter than necessary to melt rock.
这已远远超过了岩石深化的温度。
7.
Too hot machines means hardening of the rubber in the machine.
成型机温度过高极易造成液胶在机内过早固化。
8.
Deep and Ultra-deep Well Cementing Technology with Low Density Slurries in Tahe Oilfield
塔河油田深井超深井低密度固井技术
9.
The Effect of Cadmium on Phosphate Removal for Wastewater Tertiary Treatment by Immobilized Chlorella and its Change of Physiological Characteristics;
Cd~(2+)对固定化小球藻深度除磷及其生理指标的影响
10.
Research on Ozone-Immobilized Biological Activated Carbon Used in Advanced Drinking Water Treatment
臭氧固定化生物活性炭饮用水深度处理效能研究
11.
CFD simulation of jet penetration depth in gas-solid fluidized bed:comparisons with experiments
气固流化床内射流穿透深度的CFD模拟及其实验验证
12.
Study on Mould Forming Process and Mechanical Strength of Solid Catalyst;
固体催化剂的模压成型过程和机械强度研究
13.
FEPG Numerical Simulation in Curing of GFRP Pultrusion Process;
GFRP拉挤成型工艺过程固化度FEPG数值模拟
14.
The Gasification and Incineration Process Control of Industrial Solid Waste;
工业固体废弃物干馏气化焚烧的温度控制过程
15.
Preparation and Numerical Simulation for Temperature Field of Composite Ceramics by Combustion Synthesis Process
燃烧合成复合陶瓷制备及固化过程温度场模拟
16.
Simulation and experiment of the degree of cure during CFRP pultrusion
CFRP拉挤工艺过程固化度数值模拟与实验
17.
The Finite Element Analysis of Frock Temperature Scene in Complex Material Solidify
复合材料固化过程中工装温度场的有限元分析
18.
Ultrasound enhanced catalytic oxidative deep desulfurization of diesel with H_2O_2-trichloroacetic acid
超声强化过氧化氢/三氯乙酸催化氧化柴油深度脱硫研究