1.
Optiomization design of tie bar of IP based on TRIZ
基于TRIZ理论的仪表板横梁优化设计
2.
Remove the screw that secures the right door sill trim and the right cowl side trim to the right door opening sill.
拆下固定右门梁饰板和右仪表板边上饰板于右门通路梁螺丝。
3.
vertical roll entablature
(板坯初轧机的)立辊横梁
4.
One of the short timbers running fore and aft that connect the transverse beams supporting the deck of a ship.
短纵梁纵向短肋梁之一，联接支撑船甲板的横梁
5.
INSTRUMENT PANEL 22-WAY CONNECTOR
仪表板２２－路接头
6.
INSPECT THE INSTRUMENT CLUSTER CIRCUIT BOAR
检查仪器仪表组电路板。
7.
instrument cluster
仪表组（仪表板上所装的各种组合仪表）
8.
lintel of natural stone (excl. slate)
横梁,天然石料（不包括板岩）制
9.
(nautical) at the ends of the transverse deck beams of a vessel.
航海术语，船的横向甲板的梁的末端。
10.
Remove rear crossmember and skid plate, if equippe
若配备，拆卸后横梁和防滑板。
11.
Floor-beam webs have cracked in tied arch bridges.
在系干拱桥的横梁腹板上发生裂纹。
12.
Study on Defction of Transverse Joints of Simply-Supported Hollow Slab Girder Bridges
空心板简支梁桥横向铰接缝病害分析
13.
Large Deformation of Elastic Thin Beam-Plate with One Side Fixed in a Cross-Flow
弹性梁式薄板在横向绕流中的大变形
14.
A Research of Live-load Distribution Coefficient for T-type Flitch Beam Bridge
T形梁的组合板—梁桥荷载横向分布系数研究
15.
Remove left cowl side trim panel.
拆下左仪表板侧装饰板。
16.
Study on the Effect of Diaphragm on the Distortion of Steel Slab Box Girder;
横隔板设置对钢板箱形梁畸变的影响研究
17.
Position plate bracket and install attaching bolts through vehicle rear crossmember.
定位板托架并穿过车辆后横梁安装附接螺栓。
18.
Study on Transverse Distribution of Bridge-vehicle Interaction of Simply Supported Plate Girder Bridge;
简支板梁桥车桥振动的横向分布特性研究