1.
Research and design of the metal seated ball valve in water-coal slurry working condition
![点击朗读](/dictall/images/read.gif)
水煤浆工况用硬密封球阀的研究与设计
2.
Seat hardfaced with SS410 and seal welded.
![点击朗读](/dictall/images/read.gif)
配置410不锈钢和密封焊接的阀座硬面。
3.
Seal Analysis of Ball Valve Based on ANSYS WorkBench
![点击朗读](/dictall/images/read.gif)
基于ANSYS WorkBench的球阀密封面分析
4.
The metal hard seal fixed on the ball valve divides into the normal temperature and the high temperature, when the application temperature is higher than180℃, please indicate the application temperature the first.
金属硬密封固定球阀分为常温型和高温型,当使用温度大于180℃,订货时应注明使用温度。
5.
CFD Simulation in Flow Field of High Water Based Electromagnetic Pilot Valve with the Spherical Surface Seals;
球面密封高水基电磁先导阀流场的CFD模拟
6.
Cylinder force design of the spherical seal pneumatic globe valve
![点击朗读](/dictall/images/read.gif)
球面密封气动截止阀用气缸力的技术研究
7.
It has two stem sealing: one is stuffing box and another is toroidal sealing ring( O-ring).
本阀阀杆密封分为两种形式:一为填料密封;一为O型密封环密封。
8.
Non-lubricated, tapered plug assures tight seal with low breakout torque. Constructed of hardened materials with optional hard facing.
无润滑,锥形阀塞确保紧密密封,并且具有很低的启动扭矩。有硬化材料构造而成,配置备选硬面。
9.
bellows sealed gate valve
![点击朗读](/dictall/images/read.gif)
波纹管密封的闸板阀
10.
bellows seal bonnet
![点击朗读](/dictall/images/read.gif)
波纹管密封型上阀盖
11.
The Seal Structure Improvement of Multi-Seal Fuel Gas Separates
![点击朗读](/dictall/images/read.gif)
多密封燃气隔断闸阀密封结构的改进
12.
If it does not drop but there is a small leakage at test cock No.2, then No.1 ball valve has a small leak, but No.1 check valve is tight.
如果水柱没有下降,但是测试旋塞2号有点泄漏,则1号球阀有点泄漏,但是1号止回阀密封紧密。
13.
If it does not drop, but there is slow leakage at test cock No.3, then No.1 ball valve has a small leak, but No.2 check valve is tight.
如果水柱没有下降,但是测试旋塞3号有点泄漏,则1号球阀有点泄漏,但是2号止回阀密封紧密。
14.
Finite Element Analysis of Sealing Pressure of Natural Gas Ball-valve Based on Pro/E and ANSYS
基于Pro/E和ANSYS的天然气球阀密封比压有限元分析
15.
Remove check valve and valve seal from booster.
![点击朗读](/dictall/images/read.gif)
从倍力器上卸去逆止阀和阀门密封。
16.
Requirement: Valve must be tight against reverse flow.
![点击朗读](/dictall/images/read.gif)
要求:这种阀门对于回流必须密封紧密。
17.
Backseat– machined bonnet stem bushing provides back-up stem seal.
![点击朗读](/dictall/images/read.gif)
(10) 后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。
18.
Backseat– machined bonnet backseat provides back-up stem seal.
![点击朗读](/dictall/images/read.gif)
(9) 后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。