1.
Plate Fracture Repair of Casted and Welded 16V240 Diesel Engines
16V240柴油机铸焊机体板材裂纹的修复探讨
2.
Fracture Analysis of Piezoelectric Materials with Centric Cracks
中心裂纹压电材料板的断裂问题分析
3.
Causal analysis of the cracks in machining pieces of 6063-H112 aluminium alloy plates
6063-H112铝合金板材加工裂纹产生的原因
4.
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法
5.
The anti-plane fracture problems of cracked plate for functionally graded materials under shear loads is discussed.
讨论功能梯度材料裂纹板在剪切载荷作用下的反平面断裂问题。
6.
Fracture Analysis of Mode I Crack in Anisotropic Functionally Graded Materials
各向异性功能梯度材料板Ⅰ型裂纹断裂力学研究
7.
The Analysis about the Stress Field Near the Crack Tip in Composite Materials
关于复合材料单层板Ⅰ型裂纹尖端应力场的探讨
8.
The Static Characteristics and Fatigue Properties of the Center-cracked Aluminum Plates Bonded with Composite Patches;
复合材料修复含中心裂纹铝合金板的静态与疲劳特性研究
9.
The Analysis and Test Research of Cracked Metallic Structure with Bonded Composite Patch Repair;
复合材料胶接修补金属裂纹板的计算与实验研究
10.
Analysis on Nonlinear Frequence of Functionally Graded Maerial Plate with an Edge Crack
具有表面裂纹的功能梯度材料板非线性频率分析
11.
Propagation and Environmental Propagation of the Indentation Crack of Ferroelectric Materials;
铁电材料压痕裂纹的开裂与环境开裂
12.
Study on Visualization of Delamination on Set and Growth Process for Composite Advanced Grid Stiffened Plates;
含分层损伤先进复合材料格栅加筋板结构裂纹起裂和扩展过程的仿真研究
13.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
14.
Interaction between hole edge and line cracks in a thin plate
薄板中孔边裂纹与独立裂纹的相互作用
15.
Formation Mechanism and Prevention of Center and Triangle-Zone Cracks in Continuous Cast Slabs
板坯中心裂纹和三角区裂纹的成因与防止
16.
corrugating machine, for metal plates or sheets, numerically controlled
金属板材或薄板材波纹机,数控式
17.
Growing Crack Tip-fields on Anisotropic Bimaterial Interface
各向异性双材料界面裂纹扩展裂尖场
18.
Pressing sheet metal forming, its substrate should be crack.
压型金属板成型后，其基板不应有裂纹。