1.
Meshing Analysis of a Face-gear Drive with a Spur Pinion Considering Tooth Edge Contact
考虑边缘接触直齿面齿轮传动承载接触分析
2.
A Model and Method for Load-bearing Contact Analysis of Herringbone Gears
人字齿轮承载接触分析的模型和方法
3.
Loaded Contact Analysis of a Straight Teeth Face Gear by ANSYS
基于ANSYS的直齿面齿轮的承载接触分析
4.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
5.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
6.
Finite Element Simulation and Analysis of Contact and Utimate Bearing Capacity on Cable Anchor Joints;
索端冷压锚固节点接触及承载力模拟分析
7.
Load distribution analysis in a single row four-point-contact slewing ring
单排四点接触球转盘轴承的载荷分布分析
8.
Calculation of Preload Coefficient of Matched Angular Contact Ball Bearing Sets
多联组配角接触球轴承的预载荷系数计算
9.
Numerical analysis on bearing capacity behavior of foundations under combined loading considering the footing/soil interface conditions
复合加载下考虑接触作用的地基承载特性数值分析
10.
joint contact surface
连接接触面总压紧载荷
11.
To increase the contact area and permit larger loads to be carried, the balls run in curvilinear grooves in the rings.
为了增加接触面积并承受较大载荷，滚珠在内外环的曲线槽内滚动。
12.
Study on Contact Stress Distribution of Roller Bearings and Roller Profile Design under Misaligned Loads
偏载滚子轴承的接触应力分布计算及其滚子凸度设计
13.
bearing oil interface
轴承与润滑油的接触面
14.
Four point contract center-oriented thrust Ball bearing
四点接触向心推力轴承
15.
non-contact sealed ball bearing
非接触式密封球轴承
16.
radial angular contact ball bearing
径向角面接触滚珠轴承;径向角面接触滚珠轴承
17.
FEM Analysis of Contact Problem for Hybrid Ceramic Angular Contact Ball Bearing
混合陶瓷角接触球轴承接触问题的有限元分析
18.
Finite element analysis on the contact fatigue life of high speed angular contact ball bearings
高速角接触球轴承接触疲劳寿命的有限元分析