1.
Co-continuous phase morphology and properties of fluoroelastomer/epoxy acrylate elastomer blends
氟橡胶/环氧丙烯酸酯橡胶共混物的双连续相形态和性能(英文)
2.
epoxypropyl methacrylate
甲基丙烯酸环氧丙酯
3.
Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM).
通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
4.
Properties of in-situ polymerized ACM/FKM blend
原位聚合丙烯酸酯橡胶/氟橡胶并用胶性能研究
5.
Processing Technology and Properties of MVQ/ACM Rubber.
硅橡胶/丙烯酸酯橡胶并用胶的加工与性能
6.
Effects of Carbon Black on the Properties of ACM/FKM Blends
炭黑对丙烯酸酯橡胶/氟橡胶共混物性能的影响
7.
Preparation and Properties of Cis-polybutadiene Rubber/Acrylic Rubber/Poly (methyl vinyl siloxane) Blends
顺丁橡胶/丙烯酸酯橡胶/甲基乙烯基硅橡胶共混材料制备及性能
8.
Study on the Synthesis and Modification of Epoxy Acrylate Adhesive for UV-curing
UV固化环氧丙烯酸酯胶粘剂的制备及改性研究
9.
BPO INITIATED GRAFTING COPOLYMERIZATION OF VAc ON ETHYLENE PROPYLENE RUBBER
过氧化苯甲酰引发乙丙橡胶膜接枝乙酸乙烯酯研究
10.
ethylene-vinylacetate rubber
乙烯乙酸乙烯酯橡胶
11.
Compounding Technology of ACM Oil Seal Compounds for Automobile
汽车用丙烯酸酯橡胶油封胶料配合技术
12.
Study on UV curable NBR/acrylates pressure sensitive adhesive
丁腈橡胶/丙烯酸酯UV固化压敏胶的研究
13.
Study of the Properties of E-44 Epoxy/Polyester Acrylate UV-curable Adhesive System
E-44环氧树脂/聚酯丙烯酸酯光固化胶粘剂的性能
14.
The effect of the oxidant, the reductant, and the temperature on the performance of the adhesive were investigated.
研究了氧化剂、还原剂以及温度对环氧丙烯酸酯胶粘剂性能的影响。
15.
Fracture behavior of ethylene-vinyl acetate vulcanizates reinforced by sodium methacrylate or high abrasion furnace black
甲基丙烯酸钠和高耐磨炭黑增强乙烯-乙酸乙烯酯橡胶的断裂行为
16.
Influence of Post Vulcanization on Structure and Properties of ACM
二段硫化对聚丙烯酸酯橡胶结构与性能的影响
17.
Study on the Modification of CPVC by Silicone-Acrylate Rubber Particles
有机硅—丙烯酸酯橡胶粒子改性CPVC的研究
18.
The Study of Esterfying Reaction between Epoxy Resins and Carboxyl Acrylic Polymers;
环氧树脂与丙烯酸树脂酯化反应中凝胶规律的研究