1.
Numerical Analysis of Stress Intensity Factor for Semi-Elliptical Crack on Cylinder Surface
圆筒表面椭圆裂纹应力强度因子的数值研究
2.
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
3.
Twisting fracture analysis on elliptical surface cracks for rubber-steel-ball bush
含椭圆表面裂纹橡胶-钢球支座在扭转载荷下的断裂分析
4.
Three-Dimensional Finite Element Analysis of SIFs of Elliptic Surface Crack in Dimple Fastener
埋头紧固件椭圆形表面裂纹应力强度因子的三维有限元分析
5.
The Experimental Analysis of the Correction Factor of the SIF for the Transverse Surface Semi-Elliptic Crack of a Axle
轴表面横向半椭圆裂纹应力强度因子修正系数的实验分析
6.
3-Dimensional Numerical Simulation for Surface Cracks in FGMs under Thermal/Mechacal Loading;
热/机械载荷作用下含半椭圆表面裂纹FGM的3D数值模拟
7.
Stress Intensity Factor of Semi-elliptical Surface Cracks By Finite Element Analysis
半椭圆表面裂纹应力强度因子的有限元计算分析
8.
Research on deformation of crack surface of rock masses under high confining compression
高围压下岩石椭圆裂纹面构型变化规律
9.
Thermal-elastic Fracture of Hollow Cylinder with a Semi-elliptic Surface Crack
含表面裂纹圆柱壳体的热力耦合效应
10.
Analysis on Reasons of Surface Cracks Formation of S355 Round Tube Blank and Corresponding Countermeasures Taken
S355圆管坯表面裂纹成因及解决对策
11.
By using linear elastic theory, formulae for tangential stress on ellipse edge are derived.
根据线弹性理论,导出了椭圆裂纹边缘的切向应力的表达式。
12.
Crack- A mark found on a wafer that is greater than0.25 mm in length.
裂纹-长度大于0.25毫米的晶圆片表面微痕。
13.
The Research on the Surface Cracks of Continues Rolled Round Billet for Alloy Steels with a Little V and Ti
含V、Ti微合金钢连轧圆坯表面裂纹的研究
14.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟
15.
a surface whose plane sections are all ellipses or circles.
截面都是椭圆或圆的表面。
16.
Cumin (pronounced "comein") is the pale green seed of Cuminum cyminum, a small herb in the parsley family. The seed is uniformly elliptical and deeply furrowed.
孜然是欧芹科的一种淡绿色的香草植物，椭圆的形状并有着深深的条纹在种子表面。
17.
Allowing one axis of the ellipse to dwindle to zero, the crack limit solution is obtained.
将椭圆一轴缩小到零,得到了裂纹情况的位错象力。
18.
The modeⅢ stress intensity factor is deduced by considering the case in which the minor axis vanishes when the ellipse degenerates to a Griffith crack.
并利用所获得的椭圆孔洞结果推断出班型裂纹的应力强度因子。