1.
Force Analysis of Chord Bolts of Type-321 Assembled Steel Bridge
“321”装配式公路钢桥弦杆螺栓受力分析
2.
APPLICATION OF SAP2000 IN FORCE ANALYSIS OF CHORD BOLTS OF "321" PORTABLE STEEL BRIDGE
SAP 2000在“321”装配式公路钢桥弦杆螺栓受力分析中的应用
3.
draw-bar carrier bolt
牵引杆托(板)螺栓
4.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
5.
tightening bolt
拉紧螺栓，(铁)风口拉杆
6.
LOWER TRACK BAR BOLT INSTALLATION
下横拉杆螺栓的安装
7.
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
GB/T31.2-1988六角头螺杆带孔螺栓细杆B级
8.
" Bolts, small hexagon head with fit neck and hole through the shank"
GB/T24-1976小六角头螺杆带孔导颈螺栓
9.
" Bolts, small hexagon head with hole through the shank"
GB/T23-1976小六角头螺杆带孔螺栓
10.
Hexagon bolts with split pin hole on shank--Product grade A and B
GB/T31.1-1988六角头螺杆带孔螺栓A和B级
11.
"When bolting to steel flanges, longer bolts or stud may be required."
当用螺栓与钢法兰连接时,可能需要更长的螺栓或螺杆。
12.
Hexagon flange bolts--Reduced shank--Product grade B
GB/T5788-1986六角法兰面螺栓--细杆--B级
13.
Hexagon bolts with wire holes on head--Reduced shank--Product grade B
GB/T32.2-1988六角头头部带孔螺栓细杆B级
14.
Hexagon head bolts-Reduced shank-Product grade B
GB/T5784-1986六角头螺栓--细杆B级
15.
Remove bolts holding shift lever to transmission.
拆卸将排挡杆固定到变速箱的螺栓。
16.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
17.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
18.
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
GB/T31.3-1988六角头螺杆带孔螺栓细牙A和B级