1.
The temperature is automatically con trollable in the three-section drying oven respectively.
烘箱分三段加热，温度分别自动控制.
2.
Various zones within the tunnel are utilized to accomplish the three stages of heating, holding,and cooling.
使用隧道中不同区域来完成加热、保留和冷却三个阶段。
3.
The shell and cover of the waste gas preheating section and NOF heating furnace.
炉气预热段及NOF加热炉的炉壳及炉盖;
4.
These types of systems require knowledge and careful control of the heating and cooling rates of the product within the package.
在这三个阶段中,要求了解并严格控制包装后产品加热和冷却的速度。
5.
Building the Model of Strip Temperature in the Heating Process of Continuous Annealing Furnace;
连续退火炉加热段过程带温模型建立
6.
The plate heat exchanger is divided into three sections, with the middle section serving as the regeneration component of the pasteurization ystems
片式热交换器分三段,中间段作为巴氏杀菌设备的回流段
7.
Stop Heating A 3 Tube Heat Accompany FIow Process And Making A No Heating ExperimentWang libin,eng in oil and gas gathering and transferring
三管伴热流程停热伴水的不加热输送试验
8.
The thermal desorption modulator is a short, heated section at the head of the capillary column.
热解吸调制器是在毛细管柱前端的一段短的加热段.
9.
the sections of the plate heat exchanger on either side of the regeneration section are used for heating and cooling.
片式热交换器的另外两段位于回流段的两侧,用于加热和冷却。
10.
Double-deck stainless steel inner in heating section,and automatic radiator system fitting in sloww-cooling sect.
加热段双层不锈钢内胆，缓冷段有自动散热系统装置。
11.
A Summary of Poe Studies in the West;
西方艾德加·爱伦·坡研究的三个阶段
12.
He was to have three attempts at the second part of his final exams, failing to qualify each time.
他参加了三次第二阶段考试，结果三次均未通过。
13.
Product being introduced into the system begins the heating process in the regeneration section.
将产品引入此设备,开始在回流段进行加热。
14.
Instant heating device can automatically activate the shoe glue at the rear section of drying oven.
时间加热装置，可使后段烘箱自动活化鞋子胶水。
15.
MULTI-STAGE HYDROPYROLYSIS OF COAL(Ⅱ) ANALYSIS OF TARS
煤多段加氢热解过程的研究(Ⅱ)焦油组成分析
16.
A Two Stage Method for Optimal Scheduling Problem of Reheating Furnace in Hybrid Charge Mode Production
两阶段法求解混装模式下的加热炉调度
17.
Segmented Compensation Algorithmfor Thermal Deformation Error of Ball Screw in Grinding
滚珠丝杠磨削加工热变形误差的分段补偿方法
18.
Three heat settings with cool setting for airing
三档空气加热设置,一档制冷设置