1.
Research on the motion track of the aspheric optical parts processing based on the tangent rotary method
切线回转法加工非球面光学零件运动轨迹研究
2.
Research on New Principle of Processing Large-diameter & High-order Aspheric Optical Parts with Rotary Tangent Method
切线回转法加工大型高次非球面光学零件新原理的研究
3.
Research on New Principle of Processing Small High-order Aspheric Optical Parts with Rotary Tangent Method
切线回转法加工高次小型非球面光学零件新原理的研究
4.
Research on Wire Electric Discharge Machining Technology with Rotary Surface of Engineering Ceramic
工程陶瓷回转表面的线切割加工技术
5.
Design of Wire Breakage Protection Device for Vertical Rotation WEDM
立式回转线切割机床电极丝防松装置的设计
6.
The Design of NC Revolving Platform and Dividing Control Card Used in Five-axis WEDM for Diamond Milling Cutters;
金刚石铣刀五轴线切割数控回转台及分度控制卡的设计
7.
Machining of Rotating Surface of B_4C Ceramics by Wire Electrical Discharge Machining;
基于线切割机床的碳化硼工程陶瓷回转表面放电加工技术研究
8.
Research on Mortar Strength Detection by Rebound Method and Method of Mortar Flake and Drawing of Intensity Curves
回弹法、剪切法测砂浆强度的研究及测强曲线绘制
9.
I will cut the wire and fall back upon the bridge as we convened.
我先切断电线，再回头向桥头靠拢，照我们协议的办法干。
10.
A plane section of a surface of revolution containing the axis of revolution.
切平面通过旋转轴回转面的部分平面
11.
rotary vacuum string discharge filter
线排料回转真空过滤机
12.
900 evolving wire twisting machine
转回90度碾线头机
13.
Research on Manufacturing Two-screw Multiphase Pump Rotor by External Arc Generatrix Approach Method;
外切圆弧母线逼近法加工双螺杆混输泵转子技术的研究
14.
When the cutting plane is passed through the axes of holes or hollows, those features must be drawn as sections.
（4）当剖切平面通过回转面形成的孔或凹坑的轴线时，这些结构按剖视绘制，如图所示。
15.
right-angle traverse shaving
切线方向进刀剃齿法
16.
Should the current be cut, the coil would return to its original position.
如果电流切断，线圈就返回到原来位置。
17.
hot-wire cutting
(平板玻璃的)热金属丝切割法，火线切割
18.
A curve on a surface of revolution, formed by the intersection of the surface with a plane containing the axis of revolution.
回转面曲线回转面与通过旋转轴的平面相交而形成的位于回转面上的曲线