1.
Analysis on Cause of Cracking in 06Cr19Ni10(304) Hot Rolling Stainless Steel Welded Pipe
06Cr19Ni10(304)热轧不锈钢焊管开裂原因分析
2.
Cracking Analysis of Importation B70 Grade Line Welding Pipe in Cold-bend Test
进口B70级直缝焊管冷弯试验开裂分析
3.
Failure Analysis on the Cracked Weld Joint of Stainless Steel Used in Hydrocracker
加氢裂化装置不锈钢管线焊缝开裂失效分析
4.
CAUSE ANALYSIS OF WELD SEAM CRACKING ON THERMOCOUPLE SLEEVES USED FOR MAIN STEAM PIPELINE
主蒸汽管道热电偶套管焊缝开裂原因分析
5.
Study on the Crack Opening Area of Leak-Before-Break Assessment Procedure for the Welded Pipeline;
焊接管道“先漏后断”评定裂纹张开面积研究
6.
Welded Joints Cracking Analysis on Gas Turbine Pipeline Made of Austenitic Stainless Steel
烟机管线奥氏体不锈钢焊接接头开裂失效分析
7.
Early Cracking Failure Analysis of the Welded Seam for Stainless Steel Radiating Pipe in a Diesel Engine
柴油机不锈钢散热管焊缝早期开裂原因分析
8.
Inside Weld Crack Analysis and Control of SSAW Pipe
螺旋埋弧焊管内焊缝裂纹分析与控制
9.
Analysis on Causes of Peeling and Cracking of Surfacing Welding Layer of Hydrocracking Reactor
加氢裂化反应器堆焊层剥离和开裂原因分析
10.
Cracking Analysis of Arc Hardfacing Layer of Bainite Steel Frog
贝氏体钢辙叉电弧堆焊层的开裂分析
11.
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
12.
Crack Analysis and Disposal for the Weld of High-Pressure Stainless Steel Pipe in Hydrocracking
加氢裂化高压不锈钢管道焊缝裂纹分析及处理
13.
welded reinforcement of nozzle opening
接管开孔的焊接补强
14.
The Analysis of Crystal Crack of T23 Waterwall Tube-fin
T23水冷壁管排鳍片焊缝裂纹的分析
15.
Welding Technology of G-X45NiCrSiNb45-35 Steel Tubes of Ethylene Cracking Furnace
乙烯裂解炉炉管G-X45NiCrSiNb45-35的焊接工艺
16.
Welding Thermal Crack Simulation Study on X70 Grade Pipeline Steel
X70级管线钢焊接热裂纹模拟研究
17.
Traditional heaters adopt10 U bending welding type so the copper's structure changed and becomes easy to break.
一般加热器,采用几10U型弯管焊烧式型,铜管因焊烧变质容易破裂。
18.
Research on Rupture Property and Residual Stress of the Joint of High Frequency Electric Resistance Welded Pipe;
高频焊管焊接接头的断裂行为和残余应力的研究