1.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
2.
Process Research and Numerical Simulation for Upsetting Forming on the End of the Oil Tube;
油管端部镦锻成形工艺研究及其数值模拟
3.
FEM Simulation of RR Method Bend-Upset Forging of Heavy Crankshaft;
大型曲轴RR法弯曲镦锻成形有限元模拟
4.
Comparative Analysis and Research of RR, TR and NTR Upset-Bending Processes for Heavy Crankshaft of Continuous Grain Flow;
曲轴全纤维弯曲镦锻成形技术RR法、TR法、NTR法对比研究
5.
Analysis of TR Upset-Bending Process and Equipment Optimization for Heavy Crankshaft with Continuous Grain Flow
大型全纤维曲轴TR镦锻成形分析及装置结构优化
6.
Research on local upsetting finish forging process of valve blank
气门毛坯局部镦挤终锻成形工艺研究
7.
Research on Evolution of Void Defects in Heavy Forgings during Upsetting Process
大锻件镦粗成形中内部空洞型缺陷的演化规律研究
8.
TMS320F2812-Based Power System for Electric Upsetting
基于TMS320F2812的电镦成形电源系统实现
9.
Process Parameters Calculation and Intelligent Control of Electric Upsetting;
电镦成形工艺参数的确定及智能控制的研究
10.
Study on the Prediction of 1Cr18Ni9Ti Forging Property in the Heating Process;
1Cr18Ni9Ti不锈钢热镦成形工艺性能预报的研究
11.
The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet
摆辗镦粗工艺过程中塑性铰形成与特性研究
12.
Numerical Simulation Analysis of Piercing and Upsetting Extrusion Process for Spur Gear
直齿轮冲挤——镦挤成形过程数值模拟分析
13.
Heading, riveting, and staking dies also press the metal into the design established by the shape of the tool faces.
顶镦、铆接、凿缝模也能把金属按工具面的形状压制成形。
14.
transfer header
连续自动式凸缘件镦锻机
15.
Analyzing the Cause of 42CrMo Crankshaft Cracking by Upset Forged
42CrMo曲轴镦锻开裂原因分析
16.
Development and application of a CAD/CAE system for the TR forging die for crankshaft
曲轴TR镦锻模具CAD/CAE系统开发与应用
17.
Failure analysis of upset-bending equipment for a heavy crankshaft with continuous grain flow
大型全纤维曲轴TR镦锻装置失效分析
18.
Study on Eliminating Forging Accessorial Block of the Continuous Grain Flow Crankshaft Which Forming in the RR-equipment
全纤维曲轴RR镦锻消除锻造余块的工艺探索