1.
Relationship between production and initiation location of new fractures in re-fractured well
重复压裂新缝起裂位置与油井产量的关系
2.
To form a crack or cleft or cause a crack or cleft in.
形成裂口或引起裂缝
3.
SIMULATION EXPERIMENT AND STUDY OF MULTI-FRACTURES FORMATION IN HYDRAULIC FRACTURING
水力压裂多裂缝起裂模拟实验与分析
4.
Research on the parameter optimization of the preset crack's fracturing slot and ground test
预置裂缝压裂割缝参数优选及地面试验研究
5.
The images can be used to determine the location of a surface-opening crack, an internal defect, reinforcing steel bars, or the covering thickness.
所建构的影像可用以决定表面裂缝的走向及深度、内部缺陷位置、钢筋位置，及保护层厚度。
6.
Arepeat stitch trace is done automatically at the? Beginning and the end of quilting. When quilting is over, the machine go back to the start postion.
绗缝起始和结束均自动绗来回针。绗逢结速后自动返回起始位置。
7.
The rock formations break with cracks into new positions.
岩层产生裂缝而破裂移位。
8.
Study on the Fracture Initiation and Propagation Model for Horizontal Well Fracturing
水平井压裂起裂机理及裂缝延伸模型研究
9.
RESEARCH ON MANMADE FRACTURE BREAK REGULARS AND TREATMENT COUNTERMEASURES IN FRACTURED HORIZONTAL WELL
压裂水平井人工裂缝起裂规律与施工对策
10.
A New Productive Prediction Method of Horizontal Fracture Wells in Hydraulic Fracturing
水力压裂水平裂缝井产能预测新方法
11.
a narrow flattened pleat or fold that is stitched in place.
在适当的位置缝的细直褶或折缝。
12.
Failure Analysis of a Reposition Spring Installed on an Aircraft Undercarriage
某型飞机主起落架放下位置锁复位弹簧断裂分析
13.
Failure Analysis on the Cracked Weld Joint of Stainless Steel Used in Hydrocracker
加氢裂化装置不锈钢管线焊缝开裂失效分析
14.
A crack, crevice, or split.
裂缝裂隙、缺口或裂缝
15.
The sculpture shows signs of deliberate breaking where the left arm had been soldered to the shoulder.
雕像上有许多人为的裂缝。 左胳膊就是在这些位置被焊接到肩膀上的。
16.
3）The starting-crack location and pressure and direction of hydraulic fracture bore which through many coal delaminations mostly lies on the intensity of furthest-weak coal delamination and interface.
3）穿层钻孔起裂位置、方向及起裂压力主要受最弱煤分层及分层层面强度的影响。
17.
a crack in a lip caused usually by cold.
通常由于冷而引起的嘴唇上的裂缝。
18.
Observation: No blisters, no cracks nor any surface deformations were observed on the work surface.
观测结果：无起泡，裂缝或任何表面变形。