1.
Study on Resistance Spot Welding Technology of 0018Ni Austenitic Aged Steel
0018Ni马氏体时效钢电阻点焊工艺试验研究
2.
Aging Behavior and Grains Refining of 3J33 Maraging Steel
3J33马氏体时效钢时效行为及晶粒细化
3.
A Study on Aging Dynamics of Maraging Stainless Steel 00Cr13Ni7Mo4Co4W2Ti
00Cr13Ni7M04C04W2Ti马氏体时效钢的时效动力学研究
4.
twelve-two maraging stee
十二-二镍锰马氏体时效钢
5.
Investigation on Strength-Toughness Mechanism of Low Nickel, Cobalt Free Maraging Steel
低Ni无Co马氏体时效钢强韧化研究
6.
Manufacturing of Ultra-high-strength 18Ni Cobalt-free Maraging Steel
超高强度18Ni无钴马氏体时效钢的生产
7.
AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL
高强高韧FV520B马氏体钢的时效工艺优化
8.
Outline of Strengthening Ways in 18Ni Maraging Steel
18Ni马氏体时效钢强化方法概述
9.
Relationship Between Grain Size and Aging Behavior of Co-Free Maraging Steel
T250马氏体时效钢晶粒尺寸对时效析出的影响
10.
Assessment of Recovery Characteristics Occurred in Cold Rolled Maraging Steel with X-Ray Diffraction Techniques
用X射线评价马氏体时效钢冷轧材的回复效应
11.
Study on Tool and Chip Contact Area DeformationTest for Martensite Ageing Steel Cutting
马氏体时效钢的刀-屑接触区变形试验研究
12.
Influence of Heat Treatment Technology on Structure and Property of Maraging Steel;
热处理工艺对马氏体时效钢组织及性能的影响
13.
DEVELOFMENT OF MARAGING STEEL METAL POWDER-CORED WIRE FOR TIG SURFACING DIE;
TIG模具堆焊马氏体时效钢金属粉芯焊丝的研制
14.
Study on Non-Metallic Inclusions in Maraging Steel Produced by Electroslag Remelting Process
电渣重熔马氏体时效钢中的非金属夹杂物研究
15.
Research on grain refining of 18% Ni maraging stell hot extrusion tube
18%Ni马氏体时效钢热挤压管晶粒细化的研究
16.
The Cause of Maraging Steel Banded Structure and Eliminating Methods
马氏体时效钢带状组织产生的原因及消除方法
17.
Application of Thermo-Calc Software to Optimization of Heat Treatment for Maraging Steel
Thermo-Calc在马氏体时效钢热处理工艺优化中的应用
18.
Microstructure and properties of plasma nitrided 00Cr12Ni9Mo4Cu2Ti maraging stainless steel
00Cr12Ni9Mo4Cu2Ti马氏体时效不锈钢离子渗氮组织和性能