1.
EXPERIMENTAL STUDY ON THE PERFORMANCE OF EXHAUST STEAM RECLAIM DEVICE BY JETTING VORTICALLY
旋流喷射乏汽回收装置性能的实验研究
2.
Experimental study on the swirling characteristics of a swirling water jet nozzle by using PIV
旋转射流喷嘴内旋流特性的PIV实验分析
3.
Fluid flow pattern in rotor cavity of roto-jet pumps
旋转喷射泵转子腔内液体的流动规律
4.
Numerical Simulation on Flow Field of Rotory Jet Mixing System and Nozzle Structure Optimization;
旋转射流搅拌全流场数值模拟及喷嘴结构优化
5.
Calculation and Analysis about Inside Flow Field and Performance Prediction for Roto-Jet Pump;
旋转喷射泵内部流场计算、分析与性能预测
6.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
7.
Characteristic of the Start-up and Analysis about Inside Flow Field of the Roto-Jet Pump
旋转喷射泵的启动特性及内部流场研究
8.
Experimental Research on Parameters of Nozzle Slotted in Non-submerged High Pressure Swirling Jet
非淹没高压旋转水射流喷嘴割缝参数试验研究
9.
Performance analysis and application of the rotating nozzle in high pressure water-jet
高压水射流旋转喷头的参数分析及其应用
10.
Influence of Entrance Shrinking Angle on Nozzle Wear in Swirling Abrasive Water Jet
入口收缩角对旋转磨料射流喷嘴磨损的影响
11.
Design and Numerical Stimulation on Impeller and Pitot Tube in Roto-jet Pump;
旋转喷射泵叶轮和集流管设计研究及内部流动的数值模拟
12.
Numerical simulation studies of influences on the flow-fieldproperties of the rotary jet by nozzle geometric parameters
喷嘴几何参数对旋转射流流场性能影响的模拟分析
13.
Furthermore, the horseshoe shape vortex system occurred to the upstream of the jet exit and the layer structure of vortexes occurred to the wake of the reverse flow region downstream of the jet are also investigated.
另外，观测到射流喷口上流的马蹄涡系以及射流逆流区下游尾迹区旋涡的层状结构形式。
14.
An Experimental Study on Swirl Spray Flow Field and Swirl-Stabilized Flame;
旋流喷雾流场及旋流火焰的实验研究
15.
The results show that the initial parameters and thepressure difference between outer and inner surface of the hollow jet play adominant role on the shape of the liquid jet.
结果表明，旋流喷嘴的初始参数和空心射流内外表面压力差是决定射流形状的主要因素。
16.
Vortex injection provides a form of swirl or cyclone combustion for a rocket engine similar to systems often employed in industrial furnaces.
涡流喷射在火箭发动机中产生一种涡流或旋涡形式的燃烧，与工业炉中常采用的系统相似。
17.
balanced flow easy priming jet pump
平衡流量易引动喷射泵
18.
spun-laced fabric
射流喷网法非织造织物