1.
Influence of chordwise bending stiffness on aeroelastic characteristics of flexible high-aspect-ratio wing
水平弯曲刚度对大展弦比机翼颤振的影响
2.
The beam has a constant flexural rigidity.
该梁具有常数弯曲刚度。
3.
horizontally bent comb monochromator
水平弯曲中子梳单色仪
4.
Residual Collapsing Strength Analysis of Bending Part Casing in Medium/Short Radius Horizontal Wells
中短半径水平井弯曲段套管剩余抗挤强度分析
5.
Having a horizontal surface without a slope, tilt, or curvature.
水平的具有无倾斜度、倾斜角或弯曲的水平平面的
6.
DISCUSSION ON THE NECK BENDING STIFFNESS OF WORK ROLLS IN THE HYDRAULIC BENDING ROLL CONTROL SYSTEM
液压弯辊控制中工作辊辊颈弯曲刚度探讨
7.
INFLUENCE OF HOLE POSITION ON BENDING RIGIDITY OF UD-LAMINATE
穿孔位置对单向层板弯曲刚度的影响
8.
THE RESEARCH OF INFLUENCE ON SUSPENSION BRIDGES AFTER CONSIDERING BENDING RIGIDITY OF CABLE
考虑主缆弯曲刚度后对悬索桥的影响
9.
The pouring construction technology of small radius flat curve continuous steel bridge cantilever
小半径平弯曲线连续刚构桥悬臂浇筑施工技术
10.
The water is Braiding/plaiting downstream
水弯弯曲曲地顺流而下。
11.
In addition, the anal fin has a curvature that fits the round shape.
还有，尾鳍有一个弯曲度刚好适合鱼的圆型身体。
12.
Derivation and Realization on the Stiffness Equation of Uniform Section Bending Bar
等截面弯曲杆件刚度方程的推导和认识
13.
CALCULATING FORMULAS FOR EQUIVALENT STIFFNESS AND STABILITY OF CURVED BAR SIMPLY SUPPORTED AT BOTH ENDS
两端简支弯曲杆件的等效刚度、稳定性计算公式
14.
The Study on the Stiffness Performance of Steel-Pipe Trusses with Curved Chords;
弦杆弯曲的圆钢管桁架的刚度性能研究
15.
Global stability analysis of bored shafts with initial bending imperfection and varying stiffness
含初弯曲缺陷的变刚度井壁整体稳定性分析
16.
Mechanical model and analysis of casing bucking in horizontal wells
水平井套管弯曲力学模型与计算分析
17.
The stiffness of a fabric can be objectively determined as the average of the flexural rigidities (in warp and weft direction) .
织物的刚性可以客观地从经纬两个方向的弯曲刚度来确定。
18.
The slip displacement increases the curvature, reduces the stiffness, increases the additional moment and consequently leads the increase of deflection.
滑移增大结构曲率,降低构件刚度,增加附加弯矩,从而引起挠度增大。