1.
Influences of Anchor System on Web Stress of Multi-Span Continuous Steel Tub-Girders During Hauling Construction
拖拉施工锚固系统对多跨连续槽形钢梁腹板局部受力的影响
2.
They are made up of high tensile wires and are normally vertical. The deck is usually orthotropic with stiffened steel plateribs or troughs, floor beams, etc.
桥面一般是由加劲钢板肋或槽形板，桥面梁等组成的正交异性板。
3.
The Affection of Lateral Channel Stiffner for the Buckling of Stell Beams;
槽钢加劲肋对钢梁整体稳定性的影响
4.
Application of Prestressed Continuous Groove Beams in a Road Bridge
预应力连续槽形梁在公路桥梁中的应用
5.
General Design of Continuous Channel Girder of Geshui Creek Railway Bridge
葛水河桥铁路连续槽形梁的总体设计
6.
Research on the Performance of Steel Channels as Stiffeners in Bolted End-plate Beam-to-column Connections;
槽钢加劲肋在梁柱端板螺栓连接中的性能研究
7.
Study on Stability of Web with Circle Openings in Cold-Formed Thin-Wall Lipped Channel Beams
冷弯薄壁卷边槽钢梁开圆孔腹板稳定性能研究
8.
Simulation and Optimization of Bi-Slotsteel Welding Beam with the Clapboard Based on Finite Element Analysis
基于有限元带隔板双槽钢焊接梁焊接仿真优化
9.
Graver: V-shaped steel cutting tool used by engravers.Also called burin.
雕刻刀:雕刻铜版用的槽形钢刀。
10.
Analysis for Distortional Buckling of Cold-formed Thin-walled C-section Steel in Bending;
冷弯薄壁C形槽钢受弯畸变屈曲分析
11.
The Construction Problem of the U-shaped Girder of the No.6 Rail Transit of Shanghai;
上海轨道6号线槽形梁施工若干问题研究
12.
Construction technology and cost analysis of 32m railway pre-stressed trough beams;
32m铁路预应力槽形梁施工工艺与造价分析
13.
Research on Design and Construction Technique of Pretensioning Prestressed U-Shape Girder
先张法预应力槽形梁设计与施工技术研究
14.
Application Status and Prospects of PC Channel Girder
预应力混凝土槽形梁的应用现状与前景
15.
Elastic Local and Distortional Buckling Behavior of Cold-Formed Thin-Wall Lipped Channel Beams;
冷弯薄壁卷边槽钢梁的弹性局部屈曲与畸变屈曲性能分析研究
16.
Apply of grillage method on analysis of an irregular steel girder bridge
梁格法在异形钢箱梁桥计算分析中的应用
17.
A beam of channel croas section was analysed closely,. its large deformation and critical moment was given.
本文仔细分析了一个槽形截面梁的大变形并给出了其临界弯矩。
18.
" Hot-rolled channel steel-Dimensions, shape, weight and tolerances"
GB/T707-1988热轧槽钢尺寸、外形、重量及允许偏差